Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Dunedin, FL | Tampa Gate Company
We provide independent Ghost Controls gate repair throughout Dunedin, Florida, for solar and AC swing operators, slide systems, keypads, and battery backup units. The short version: if your Ghost Controls gate is reversing mid-travel, stalling after cloudy days, or ignoring keypad codes, the salt air off Clearwater and St. Joseph Sound is usually part of the story. We’re Tampa Gate Company, a gate-only shop, and we handle these systems at the component level across ZIP codes 34697 and 34698. Call (866) 976-0095 for service. Our Ghost Controls sales & service work spans coastal Pinellas, and Dunedin’s corrosion patterns are the worst we see.
Why Dunedin Residents Choose Us for Ghost Controls Service
We work on Ghost Controls systems specifically, not as one line item on a long list of unrelated trades, and we also handle Ghost Controls repair in Clearwater. Our crew opens Ghost Controls control boxes, tests solar battery harnesses, and traces keypad wiring every week across Dunedin, which means we recognize failure patterns the moment we pull the cover off. Noel Carver, our owner, started with electrical and mechanical fundamentals at Hillsborough Community College before spending decades focused almost entirely on gate systems. When a Dunedin homeowner calls about a Ghost Controls operator that stalls by mid-afternoon, we don’t guess. We check charge voltage, harness corrosion, and limit switch behavior in the order that coastal Florida tends to break them. And we’re honest about when a repair makes sense versus when a corroded unit has reached the end of its useful life.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Dunedin
- Controller board corrosion from salt fog. On the Dunedin Causeway and Honeymoon Island side, we see green verdigris and pitted header pins on Ghost Controls control boxes within a few years of installation. The result is phantom limit faults and gates that reverse mid-travel for no apparent reason. This is a corrosion failure, not a programming issue, and it needs board-level attention, not a factory reset.
- Solar battery and charge-harness degradation. Gulf humidity plus heavy rainy-season cloud cover leaves undersized solar panels unable to fully recover the battery. Ghost Controls solar operators on Dunedin homes then stall halfway through a cycle by mid-afternoon. The battery usually tests weak, but the real question is whether the charge harness has corroded at the connector, because replacing the battery alone won’t fix a bad harness.
- Pivot-arm and bracket fastener seizure. The coated steel arms and lag hardware on Ghost Controls swing kits gall and seize where they meet original aluminum or steel gates. We see this most on 1970s and 80s canal-front homes in Dunedin, where original gates have been in place for decades. When a homeowner forces a manual release, the seized lag bolts snap inside the gate post or the block wall.
- Wireless keypad and remote dropouts. UV-cracked keypad gaskets let moisture into Ghost Controls AXWK-style keypads, so codes register intermittently. Technicians often misdiagnose this as a receiver problem and start swapping boards. In Dunedin’s rainy season, a keypad that works on dry days and quits after a downpour is almost always a gasket seal issue.
- Battery backup failure on AC systems. AC-powered Ghost Controls operators with battery backup are common on Dunedin properties that need the gate to function during hurricane-season power outages. The backup battery sits in a warm, humid enclosure and sulfates faster than expected. We test these regularly because a backup battery that doesn’t hold a charge is no backup at all.
Ghost Controls Service in Dunedin: What Local Conditions Mean for Your Equipment
Here’s the detail that changes how we approach every Ghost Controls repair in Dunedin, and the same logic applies when we’re called for Ghost Controls repair in Belleair. On the Causeway corridor and around the Honeymoon Island side, airborne salt fog pits gate hinges and aluminum frames in five to seven years. The same hardware installed just east of US-19 runs twelve to fifteen years before failing. That’s a measurable difference, and it means a Ghost Controls system on a canal-front street off the Dunedin Causeway is a corrosion-remediation job first and a mechanical repair second. We specify marine-grade stainless fasteners where OEM zinc hardware will die early. We inspect header pins on the control board for verdigris even when the reported symptom is a keypad problem. We treat the salt environment as a constant active force on every component, because in coastal Dunedin it is. A gate that almost works is a gate that doesn’t work, and salt air is why so many Dunedin gates only almost work.
Ghost Controls Models & Products We Service in Dunedin
We service the Ghost Controls Heavy-Duty Dual Swing (TDS series) in both solar and AC configurations, the Standard Duty Single Swing (TS series) with tube-gate arm, and slide-gate opener kits for aluminum and vinyl-track driveway gates. We also work on the accessory line: AXWK wireless keypads, safety photo-eyes, and plug-in or solar battery harnesses. For parts, we use Ghost Controls OEM boards, arms, and battery harnesses where they’re the right fit for the application. Where OEM hardware won’t survive Dunedin’s salt air, we use quality aftermarket photo-eyes, keypads, and marine-grade stainless fasteners. Our Dunedin service area coverage means we keep common Ghost Controls parts staged for fast local turnaround.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Dunedin
Service pricing for Ghost Controls gate work in Dunedin depends on what we find when we open the system. A wireless keypad replacement or photo-eye swap runs on the lower end. Battery harness replacement, the repair we recommend most for solar systems on the Causeway side, sits in the middle range. A controller board replacement lands higher, and a full operator rebuild with marine-grade fasteners and a new arm is the most involved. Every job is quoted and agreed before any work starts, so you know the number before we turn a wrench. Call (866) 976-0095 and we’ll come assess the system, explain what’s failed and why, and give you a written price. The estimate is free.
Serving Dunedin, FL — Our Local Coverage Area
We’re based in the Dunedin area and know this community well, and we also provide Greenbriar Ghost Controls service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Dunedin
That’s most often a solar charge problem. Afternoon stalling happens because the battery drained overnight and the panel hasn’t recovered enough charge through the morning, especially during cloudy stretches or rainy season. We check the panel output, the battery condition, and the charge harness connector, which is where salt corrosion usually breaks the circuit first on Dunedin coastal properties. Call (866) 976-0095 and we’ll test all three instead of guessing.
Yes, but only with attention to the gasket. The keypad electronics themselves are fine in coastal conditions. What fails is the rubber gasket around the housing, which UV exposure cracks within a few years, then moisture gets inside and codes register intermittently. We replace cracked keypad gaskets before they kill the board, and on Causeway-area installs we recommend checking that seal at least twice a year. The fix is quick when caught early. Call (866) 976-0095 for a keypad inspection.
The coated steel pivot-arm bolts seized against the gate bracket over time, usually accelerated by Dunedin salt air, and when you pulled the manual release the seized hardware sheared. This is common on older canal-front homes where original aluminum gates have been in place for decades. We replace the snapped fasteners with marine-grade stainless and re-tap the mounting points rather than reusing the same hardware that failed. If the gate post has corroded around the bolt, we address the post as well. Call (866) 976-0095 and we’ll get the gate moving again.
If the corrosion is limited to the header pins and minor surface oxidation, a board repair is usually the right call. If the box is corroded through, the board is heavily pitted, and the arm is seized, a rebuild often costs more than a clean replacement. We’ll show you exactly what we found and give you numbers for both paths, so you can make the decision with the box open in front of you.
We do. We service nine of the most common gate brands, including LiftMaster, FAAC, BFT, Viking, Mighty Mule, and Ghost Controls, and we offer Belleair Bluffs Ghost Controls service as well. We’re an independent shop, not affiliated with or authorized by Ghost Controls, which means we troubleshoot the whole gate system rather than defaulting to a board swap. If you have mixed-brand equipment on one property, we handle all of it. Call (866) 976-0095 for a free estimate.
Service Areas Near Dunedin
Our Ghost Controls service extends beyond Dunedin to nearby Pinellas and Hillsborough communities. We also serve Ghost Controls service in Largo, Ghost Controls service in Gulfport, Clearwater, Safety Harbor, and Palm Harbor. If your gate is near the water anywhere in coastal Pinellas, the salt-air experience we bring from Dunedin applies directly.
Book Your Ghost Controls Service in Dunedin Today
If your Ghost Controls gate is acting up in Dunedin, call (866) 976-0095 for a free estimate. We’ll diagnose the system, explain what’s actually wrong, and quote the repair before any work starts. We repair first and recommend replacement only when repair isn’t the right answer.
Written by Noel Carver, Owner at Tampa Gate Company, serving Dunedin and coastal Pinellas since day one.