Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dunedin, FL
Gate installation in Dunedin means working with mid-century concrete-block ranches, 1980s canal-front subdivisions, and hardware that has spent decades in salt-laden Gulf air. We install driveway gates, electric gate systems, and sliding gates built for this climate, not for a showroom in Ohio. Tampa Gate Company has served Dunedin since 2013, and we quote every installation up front before any work starts. Call (866) 976-0095 for a free estimate.
Why Dunedin Homes Are Different
Dunedin’s 1970s and 80s canal and near-shore homes present a corrosion problem inland Pinellas gate repair rarely sees. Gate operators, hinges, and latches on the St. Joseph Sound side and along the Dunedin Causeway corridor corrode from the inside out. Airborne salt fog pits aluminum frames and seizes steel fasteners within five to seven years, about half the life of identical hardware just east of US-19. A gate that looks fine on the outside is often rusted through at the post mounts. We specify stainless and marine-grade components on Dunedin installs by default, because standard residential hardware fails early here.
The housing stock compounds it. Concrete-block ranch homes from the 1950s through 1970s make up much of the city, and many still carry original aluminum or steel pool and driveway gates. Fasteners have often corroded into the block itself. In the older downtown-adjacent neighborhoods, vinyl privacy fencing has become common, but the gate hardware behind it still ages in the same salt air. Sandy soil settling along the barrier-island edge also shifts gate posts and roll-track alignment over time. Coil springs pop, and a steel gate that once latched cleanly starts dragging on the pavers. When we set a post in Dunedin, we account for that movement.
Styles & brands we work with
Our Main Dunedin Services
Two jobs dominate our call volume in Dunedin: mechanical gate repair and electric gate repair. Here is what each involves locally and where to find the full breakdown.
Gate Repair in Dunedin
A sagging steel driveway gate in Dunedin is usually a hinge or post problem, not a gate problem. Salt air has eaten the hinge pins or the lag bolts have pulled loose from corroded concrete block. We replace the hardware, re-square the gate, and get it swinging and latching again. On canal-front properties we see the same failure pattern: the top hinge fails first because the gate weight pulls against it while the salt works on the pin. Read the full Dunedin-specific breakdown at Gate Repair in Dunedin.
Electric Gate Repair in Dunedin
Electric gate repair in Dunedin often starts at the control board, not the motor. Coastal humidity and rainy-season downpours push moisture into the operator housing, corroding board connections and tripping safety sensors. A gate that opens but will not close, or closes halfway and reverses, is usually a loop or sensor fault. We diagnose the motor, board, and safety loop together, because the symptom rarely points to the failed part directly. The full electric gate repair guide for this city is at Electric Gate Repair in Dunedin.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Dunedin
Gate installation in Dunedin has to be specified for coastal salt exposure from day one. A galvanized gate and standard hardware installed on the Causeway side will show pitting within five years, while the same package a mile east of US-19 runs twelve or more. We plan every Dunedin installation, from Gate Installation to final adjustments, around marine-grade fasteners, sealed operator housings, and post settings that account for sandy soil movement.
Automatic Gate Installation
Signs you need it
A manual gate you have to leave the car to open is a daily inconvenience, and on Dunedin’s canal streets it also means an open driveway every time someone is lazy about the latch.
What it costs in Dunedin
Motor and operator packages for automatic gate installation in Dunedin typically run $1,850 to $4,800 depending on gate weight and whether we add a keypad or intercom.
How we do it
We mount the operator, run the power and low-voltage wiring, install safety loops or photo eyes, and program the remote controls and keypad before testing the full open-close cycle.
Driveway Gate Installation
Signs you need it
A driveway gate in Dunedin that has rusted through at the post hinges or no longer closes square is past repairing and needs replacement.
What it costs in Dunedin
A new aluminum or steel driveway gate installed in Dunedin typically runs $2,100 to $6,800, with the higher end covering wider openings and canal-front corrosion packages.
How we do it
We measure the opening, recommend a gate material and hinge layout for salt exposure, set posts in concrete below the settling zone, and hang the gate level before installing the latch and operators.
What Gate Installation Costs in Dunedin
| Item | Typical range in Dunedin |
|---|---|
| Motor and operator package (automatic) | $1,850 – $4,800 |
| Complete driveway gate installation (aluminum or steel) | $2,100 – $6,800 |
| Heavy-duty or custom gate (longer runs, coastal hardware) | $4,100 – $9,200 |
How long does gate installation take in Dunedin?
Most standard driveway gate installations in Dunedin finish in one day. Custom or heavy-duty gates with automation may take two days, depending on the post setting and electric run.
Do you handle the permits or HOA approval for a Dunedin gate?
We install to the city and county requirements and can provide the spec sheet your HOA or property manager asks for. You handle the HOA application, and we build what it approves.
Brands We Service in Dunedin
We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, including older models that other companies will not touch. We stock common boards, receivers, and safety sensors for these brands, which gets most Dunedin repairs moving the same visit. Our full brand coverage is listed at our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dunedin, FL
| Service | Typical range in Dunedin |
|---|---|
| Manual gate repair (hinges, latch, post reset) | $175 – $600 |
| Electric gate diagnostic and board-level repair | $250 – $850 |
| Operator or motor replacement | $850 – $2,400 |
| Safety loop or photo eye repair | $200 – $650 |
| Automatic gate installation (motor and operator package) | $1,850 – $4,800 |
| Driveway gate installation (aluminum or steel) | $2,100 – $6,800 |
| Heavy-duty or custom gate installation | $4,100 – $9,200 |
Salt-air corrosion and canal-front post settings push Dunedin prices toward the upper end of these ranges, because we are often replacing hardware that has fused into concrete block rather than making a simple swap. Every job is quoted with the full price agreed before we begin work, and estimates are free.
Neighborhoods We Serve in Dunedin
We cover the full Dunedin area, from the older blocks near downtown through the canal subdivisions and the near-shore streets running toward Honeymoon Island. Most calls in Dunedin get same-week scheduling, and we are familiar with the parking and access realities of the narrow canal-side streets.
- Dunedin Isles
- Fairway Estates
- Bayshore Heights
- Spanish Acres
- Curlew area (north county line)
Service Area – Cities Near Dunedin
We handle gate repair and installation throughout the surrounding Pinellas cities. North Pinellas work often brings us the same coastal salt conditions we see in Dunedin, and we are familiar with the subdivisions and gate styles in Clearwater, FL, the smaller residential lots of Belleair, FL, the quieter streets of Greenbriar, FL, and the waterfront properties in Belleair Bluffs, FL.
Serving Dunedin, FL — Our Local Coverage Area
We’re based in the Dunedin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dunedin
Most Dunedin repair calls are scheduled within the same week, and we prioritize gates that are stuck open or preventing access. Call (866) 976-0095 in the morning and you will usually have a time slot set the same day.
Most standard residential gate installations in Dunedin do not need a permit, but electric gate automation often requires an electrical permit, particularly for a new power run. We handle the details and tell you up front what applies.
Yes, and this is most of our Dunedin work. The 1980s and 1990s canal-front systems often have operator brands or control boards that are still serviceable with the right parts knowledge, even when the hardware around them has corroded.
Call (866) 976-0095 for a free estimate on any gate repair or installation in Dunedin. We quote the full price up front, before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dunedin Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang