Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in South Venice, FL
We install, repair, and maintain the gate systems that South Venice homeowners depend on every day. Most of our work here involves driveway gates on 1950s-1980s block homes and the manufactured-home communities along the canals. Salt air, sandy soil, and afternoon storms change how gates fail in this ZIP code, and we spec every new installation to survive those conditions from day one. If your gate is leaning, seized, or off its track, call (866) 976-0095 and we’ll get it handled.
Why South Venice Homes Are Different
The housing stock in South Venice tells you almost everything about the gate work we do here. These are predominantly single-story concrete-block and stucco homes from the 1950s through the 1980s, built on small lots with shallow footings. A significant portion of the community is manufactured and mobile homes in the older canal-adjacent neighborhoods. That means gates are usually modest in scale: wood, vinyl, chain-link, or aluminum driveway gates anchored in concrete pads that were never engineered for the soil they sit in.
The bigger factor is the environment. South Venice sits on the Gulf Coast with salt-laden air moving through year-round. Hinges, latches, and galvanized posts corrode from the inside out here, often failing at the hardware long before the gate panel shows any wear. The sandy, shell-heavy soil shifts with every summer storm cycle, and posts that were plumb in April can lean noticeably by September. A gate company that only knows inland conditions will chase the wrong problem. We start with the assumption that corrosion and settlement are in play on every South Venice job.
Styles & brands we work with
Our Main South Venice Services
Two calls dominate our work in South Venice: gates that won’t open or close properly, and electric systems that stopped responding altogether. Here’s what each one involves locally.
Gate Repair in South Venice
Most South Venice repair calls start with a gate dragging, sagging, or refusing to latch. The usual culprits are rusty hinges, corroded latch hardware, or posts that have leaned out of plumb in sandy soil. We diagnose the actual cause, replace or reset the failed components, and get your gate swinging true again. If you’re dealing with a sagging panel, a seized hinge, or a gate that scrapes the ground every time you open it, see Gate Repair in South Venice for the full breakdown of what we do and what it costs.
Electric Gate Repair in South Venice
Electric and automated gate systems add a layer of complexity that generalists often misdiagnose. In South Venice’s humid, salt-heavy air, control boards corrode, safety sensors get fouled, and motors work harder as the gate hardware itself degrades. We trace the fault through the motor, the board, and the safety loop, not just the first obvious symptom. For automatic driveway gates, keypad entry systems, or operators that stopped responding, see Electric Gate Repair in South Venice.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in South Venice
Installing a gate in South Venice means building for salt air, sandy soil, and decades of daily use. Whether you’re replacing a rusted-out 1970s chain-link gate or putting in a new automated driveway system, we size the posts, hardware, and operator for this specific environment. If you’re weighing repair versus replacement, our team will give you an honest read. We install what makes sense for your property, not whatever’s easiest to sell. For more detail on our full installation process and options, see Gate Installation.
Automatic Gate Installation
Signs you need it
A manual gate you open and close by hand several times a day becomes a real burden, especially during South Venice’s summer storm season.
What it costs in South Venice
Automatic gate installation in South Venice typically runs $1,350 to $4,000 depending on operator type, gate size, and whether power needs to be run to the gate.
How we do it
We mount the operator, set the travel limits and force settings, wire the control board, install safety sensors, and test the full open-close cycle several times without you lifting a finger.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted through, leaning past repair, or simply too far gone to keep adjusting every few months.
What it costs in South Venice
Driveway gate installation in South Venice ranges from $850 to $2,800 for the gate, posts, and hardware, with automation adding from $500 to $1,600 more.
How we do it
We dig and set posts in concrete sized for South Venice’s sandy soil, hang the gate with corrosion-resistant hardware, and adjust everything so it swings level and latches cleanly.
Sliding Gate Installation
Signs you need it
Your driveway or lot is short on swing clearance, or your current sliding gate keeps jumping the track and binding.
What it costs in South Venice
Sliding gate installation in South Venice typically costs $1,600 to $3,800 for a complete system with track, rollers, and operator.
How we do it
We set the track on a level concrete base, mount the gate on rollers, install the operator and safety stops, and run the gate through full cycles to confirm smooth travel.
What Gate Installation Costs in South Venice
| Item | Typical range in South Venice |
|---|---|
| Driveway gate and posts | $850 – $2,800 |
| Automatic operator add-on | $500 – $1,600 |
| Full automatic gate system | $1,350 – $4,000 |
How long does gate installation take in South Venice?
Most South Venice gate installations are finished in one to two days, depending on whether concrete needs to cure before we hang the gate and wire the operator. We always confirm the timeline before starting.
Do you handle the power run for an electric gate in South Venice?
Yes, we coordinate the electrical run and handle the low-voltage gate wiring while a licensed electrician handles any line-voltage work. We confirm the full scope and price before any work begins so there are no surprises.
Brands We Service in South Venice
We service the systems South Venice homeowners actually have: LiftMaster, FAAC, Mighty Mule, BFT, and more. Because we work gate-only, we keep common boards, sensors, and hardware moving through our stock. That means fewer days waiting on parts. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in South Venice, FL
| Service | Typical range in South Venice |
|---|---|
| Hinge or latch replacement | $95 – $220 |
| Gate post reset | $185 – $400 |
| Driveway gate and posts | $850 – $2,800 |
| Automatic operator add-on | $500 – $1,600 |
| Full automatic gate system | $1,350 – $4,000 |
| Electric gate diagnostic | $95 – $160 |
| Control board replacement | $220 – $475 |
| Operator motor replacement | $350 – $780 |
| Safety sensor replacement | $125 – $260 |
In South Venice, the big price drivers are salt corrosion that’s eaten through multiple hardware points at once, and posts that need resetting in sandy soil after storm season. Whatever the job, we quote the full price and confirm it with you before any work starts. You’ll never see a surprise line item at the end.
Neighborhoods We Serve in South Venice
We cover all of South Venice ZIP code 34295, from the canal-side streets to the manufactured-home communities and everything between. These are the areas where we’re working most weeks:
- South Venice Shores
- Venice East
- The manufactured-home communities along East Venice and Border
- Streets off Euclid and Shamrock
- Canal-adjacent lots near Alligator Creek
Most South Venice calls can be scheduled within a day or two, and we route our Tampa-based crews to this area weekly.
Service Area – Cities Near South Venice
South Venice sits in a cluster of small Gulf Coast communities where we work regularly. If you’re a little north or south of 34295, we still cover you. We also serve Venice Gardens, FL, Venice, FL, Nokomis, FL, and Laurel, FL. Same gate-only team, same upfront pricing, just a few more miles down the road.
Serving South Venice, FL — Our Local Coverage Area
We’re based in the South Venice area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in South Venice
Yes. Tampa Gate Company has served South Venice since 2013, and our gate-only crews work in 34295 on a weekly basis. We schedule South Venice calls like any other local job, not as a far-off service area we’ll get to eventually.
South Venice itself does not have mandatory HOA gate restrictions across the whole community, but some manufactured-home communities and canal neighborhoods do have fence and gate height rules. We’ll work with whatever your community requires and let you know if a permit applies before we start.
We schedule South Venice jobs Monday through Saturday and confirm a specific arrival window the day before. For a gate that’s stuck open or won’t close and is creating a security problem, call us and we’ll work you in where we can. Call (866) 976-0095 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What South Venice Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett