Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lecanto, FL
Gate installation in Lecanto covers a wider range of jobs than almost anywhere else in Citrus County. One day we’re setting a heavy tube-steel gate across a sandy double-track leading to a cattle lease, the next we’re mounting a decorative aluminum driveway gate in a master-planned community off SR-44. The common thread is that Lecanto’s soil, storms, and long driveways punish under-built work. Tampa Gate Company has served Lecanto since 2013, and we build every gate for what this ground and this weather actually do. Call (866) 976-0095 for a free estimate.
Why Lecanto Homes Are Different
Lecanto’s housing stock splits into two distinct jobs. The 1980s through 2000s ranches and manufactured homes on fenced multi-acre parcels usually need functional, heavy-duty gates that hold up to wind and daily use. The newer gated-community villas along the SR-44 corridor lean toward decorative gates that must meet HOA design standards while still carrying an automatic opener. Both sit on the same sandy soil and shallow water table. A gate post set without enough depth or proper concrete will lean noticeably within a single season, and we see it repeatedly on Lecanto acreage. The near-daily summer thunderstorms do two things to automatic systems: lightning and wind gusts trip GFCI and photo-eye faults, and flooding in the loop saw-cuts makes Florida’s required pull-to-open exit loops trigger constantly. Any gate installed in Lecanto has to be built for standing water at the base, corrosion from high humidity, and wind loads that manufactured-home parcels feel harder because there’s often no tree line to break the gusts.
Styles & brands we work with
Our Main Lecanto Services
Most Lecanto homeowners call us for one of two reasons: a gate that won’t open or close reliably, or a new gate that should have been built differently for this property. Both start with the same phone call.
Gate Repair in Lecanto
A sagging gate on a long Lecanto driveway isn’t just noisy – it’s dragging the hinges out of the post and stressing the opener until something fails. We repair the hardware and the structure together: re-hanging gates, welding cracked frames, setting posts that have leaned in sandy soil, and replacing hinges, rollers, and latches on everything from ranch tube gates to HOA-style aluminum panels. If the gate is chain-driven or slide-mounted, we check the track and guide rollers before they chew through a new wheel. For the full scope of what we fix, see Gate Repair in Lecanto.
Electric Gate Repair in Lecanto
When an automatic gate stops mid-cycle or won’t respond to the remote, the cause in Lecanto is usually one of three things: a control board that took a nearby lightning hit, a safety loop that’s flooded or cut, or a photo-eye knocked out of alignment by wind. We diagnose the motor, board, sensors, and loops as a system – not just the part that’s visibly broken. We work on LiftMaster, FAAC, BFT, Viking, and Mighty Mule systems specifically, so the board and wiring layout are familiar before we open the cover. Details are on the Electric Gate Repair in Lecanto page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lecanto
Gate installation in Lecanto means building for sandy soil, standing water in the wet season, and wind that hits exposed acreage harder than most installers expect. We spec the post depth, concrete volume, and hardware grade for the specific soil and gate weight – not from a generic chart. The goal is a gate that stays square and keeps its automation reliable for years. For more on the full process, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening a heavy gate by hand multiple times a day on a long Lecanto driveway, or you want controlled access without leaving the vehicle.
What it costs in Lecanto
Automatic gate installation in Lecanto typically runs $2,800 to $9,500 installed, with slide systems at $3,500 to $9,000, swing systems at $2,800 to $7,500, and barrier arm systems at $2,500 to $6,000.
How we do it
We set posts to depth for Lecanto’s sandy soil, mount the operator and rack or arm, pull the power run and safety loops, then program remotes, keypad, and obstruction settings on site.
Driveway Gate Installation
Signs you need it
Your existing gate is rusted through, too light for the wind it takes, or no longer matches the home after a renovation or HOA update.
What it costs in Lecanto
A new driveway gate in Lecanto typically runs $2,800 to $9,500 depending on material and whether it’s a swing or slide configuration, with simple single-swing steel gates starting around $2,800.
How we do it
We measure the opening and grade, build or order the gate to wind load and setback, set reinforced posts, hang and align the gate, and install the opener if it’s automated.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the road and a swing gate would drag or catch, or you’re on a rural Lecanto parcel where the gate needs to clear a wide equipment opening.
What it costs in Lecanto
Sliding gate installation in Lecanto typically runs $3,500 to $9,000 installed, including the track or cantilever system, motor, and safety loops – we only quote V-track systems, not unsupported cantilever designs.
How we do it
We lay a level track or cantilever rail system on a proper base, mount the gate and drive, set end stops and safety edges, and program the operator for the gate’s full travel.
What Gate Installation Costs in Lecanto
| Item | Typical range in Lecanto |
|---|---|
| Driveway gate installation | $2,800 – $9,500 installed |
| Automatic slide gate system | $3,500 – $9,000 installed |
| Automatic swing gate system | $2,800 – $7,500 installed |
Does an HOA in Lecanto have to approve my gate first?
Most of the master-planned communities along SR-44 require design review before a gate goes in. We can work from the HOA’s approved style sheet and provide the specs they ask for.
How long does a Lecanto gate installation take?
Most driveway gate installations in Lecanto are done in one to two days once the gate and operator arrive. Custom gates and slide systems with concrete work can add a day. We schedule the full job before we start.
Brands We Service in Lecanto
We work on Viking, Ghost Controls, DoorKing, and Elite systems regularly in Lecanto, and we keep common boards, remotes, and safety edges stocked for those brands. That means fewer Lecanto repair calls wait on a shipped part. See our brands for the full depth of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lecanto, FL
| Service | Typical range in Lecanto |
|---|---|
| Gate repair service call | $75 – $120 |
| Gate opener repair | $200 – $2,000 |
| Gate spring replacement | $150 – $450 |
| Gate hinge replacement | $150 – $500 |
| Gate wheel or roller replacement | $100 – $400 |
| Gate post repair or reset | $300 – $1,000 |
| Electric gate repair | $200 – $2,000 |
| Slide gate repair | $200 – $2,000 |
| Automatic gate installation | $2,800 – $9,500 |
| Driveway gate installation | $2,800 – $9,500 |
What pushes price up in Lecanto is usually site work: posts set deeper for sandy soil, loop saw-cuts through thick shell or clay, and longer power runs on acreage driveways. Whatever the job, we quote the full price before any work starts, and that number doesn’t change unless you change the scope.
Neighborhoods We Serve in Lecanto
We cover all of Lecanto’s 34460 and 34461 ZIP codes, from the acreage off Gulf to Lake Highway down to the communities along SR-44 and the gated developments west toward Black Diamond. Typical response for a gate repair call in Lecanto is same-day or next-day depending on the season.
- Citrus Hills
- Beverly Hills
- Black Diamond
- Pine Ridge
- Sugarmill Woods
Service Area – Cities Near Lecanto
Tampa Gate Company serves Lecanto and the surrounding Citrus County communities. We regularly work in Citrus Hills, FL, Beverly Hills, FL, Black Diamond, FL, and Pine Ridge, FL. If your gate is acting up and you’re anywhere near these areas, one call gets a gate specialist on it.
Serving Lecanto, FL — Our Local Coverage Area
We’re based in the Lecanto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lecanto
Most Lecanto repair calls are scheduled same-day or next-day. Emergency calls for gates stuck open or closed get priority, and rural acreage jobs on the east side of the county usually add a little drive time but not a day.
It depends on the property and HOA. Many rural Lecanto parcels don’t require a county permit for a gate replacement, but gated communities along SR-44 usually have design review. We’ll tell you what applies to your address on the first call.
Yes, and that’s a big part of our Lecanto work. We handle tube steel ranch gates, automatic slide gates on long drives, and gate openers on solar or battery systems where there’s no line power at the road.
If your Lecanto gate is leaning, stuck, or ready for a full replacement, call Tampa Gate Company at (866) 976-0095. We’ll give you a straight answer and a written quote before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lecanto Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett