Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Crystal River, FL
Gate installation in Crystal River means building for salt air, storm surge, and soil that shifts after every hurricane season. Tampa Gate Company has served Crystal River since 2013, and we’re the gate-only specialist that handles everything from a rust-frozen manual driveway gate on a 1970s canal-front ranch to a full automatic slide gate on a new Kings Bay waterfront build. Most of our Crystal River work happens in ZIP codes 34423, 34428, and 34429, where the housing stock runs from aging canal homes to mobile homes in Pine Ridge to newer gated communities. Call (866) 976-0095 for a free estimate on any gate job.
Why Crystal River Homes Are Different
Crystal River’s gate repair market is dominated by waterfront and near-waterfront canal homes, where salt-laden air, storm surge events, and constant humidity corrode operators, hinges, and electronics far faster than inland. We regularly open control boxes near Kings Bay and find oxidized aluminum terminals and salt-crusted chains that would look normal in Dunedin but are completely rotted here after two or three summers. The newer gated communities tend to have automatic swing gate systems with failing marine-grade hardware, while the older canal-front homes often still have manual driveway gates with hinges that have been soaking in salt haze since the Reagan administration.
There’s another layer to Crystal River that most companies miss: many properties abut protected manatee habitat, so any gate repair or installation has to keep runoff and debris out of the spring-fed canals. That changes how we stage a job, what we use for lubrication, and where we place equipment during teardown. It also means we plan around afternoon thunderstorms from June through September, when welding or control-board work near the water has to be sequenced carefully.
Styles & brands we work with
Our Main Crystal River Services
Crystal River homeowners call us most often for two things: a gate that won’t open at all, and an electric gate that opens halfway and quits. Here’s what each involves locally.
Gate Repair in Crystal River
A manual gate that drags, sags, or won’t latch is a security problem first and a convenience problem second. In Crystal River we see hinge posts pulling out of sandy canal-side soil, salt-corroded latch hardware, and gate frames twisted by hurricane-force gusts. We repair first, replacement is only the recommendation when repair isn’t the right answer. Gate Repair in Crystal River covers welded steel repairs, post resetting, hinge replacement, and alignment work specific to this coastal soil.
Electric Gate Repair in Crystal River
Electric gate acting up? We diagnose the motor, board, and safety loop, not just the obvious. In Crystal River the usual failure is salt intrusion into limit switches, control boards, and photo-eye wiring, especially on canal-front properties in 34428 and 34429. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems specifically. Electric Gate Repair in Crystal River covers everything from a salt-crusted keypad to a control board that shorted during a summer squall.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Crystal River
Gate installation in Crystal River has to be engineered for what this coast throws at it: salt spray that eats powder coating, storm surge that undermines concrete footings, and afternoon lightning that fries unprotected boards. Whether you’re replacing a rusted manual gate on a 1970s canal-front lot or putting an automatic driveway gate on a new construction on the Crystal River canals, the footing depth, hinge material, and opener enclosure all have to be specified for this environment. We install the same way we repair: diagnose the site first, then build for the conditions, not for a catalog photo. Our full Gate Installation service covers everything from single-swing residential gates to commercial slide gates.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open the gate every time, or your existing automatic opener has failed more than twice in 12 months.
What it costs in Crystal River
Automatic gate installation in Crystal River typically runs from $3,000 to $8,500 depending on gate length, opener type, and whether we’re running new power to the property line.
How we do it
We set the footings below the local frost line, mount the opener in a sealed enclosure, run power and low-voltage wiring in conduit, and program the limits and safety loop before we leave.
Driveway Gate Installation
Signs you need it
Your current driveway gate has posts leaning from sandy soil, a frame that scrapes the ground, or hardware so rusted it can’t be salvaged.
What it costs in Crystal River
Driveway gate installation in Crystal River typically runs from $1,800 to $6,000 depending on gate width, material, and whether we’re setting new posts or rebuilding existing footings.
How we do it
We remove the old gate, pour new footings with rebar for coastal soil stability, hang the new gate on stainless or marine-grade hinges, and set the latch and drop rod.
Sliding Gate Installation
Signs you need it
Your driveway has limited swing clearance, or the existing swing gate scrapes uneven ground every time the soil settles after rain.
What it costs in Crystal River
Sliding gate installation in Crystal River typically runs from $3,500 to $9,000 depending on gate weight, track length, and whether we’re automating it.
How we do it
We pour a reinforced concrete track base, set the steel V-track rail, hang the gate with roller trucks, and add a cantilever or track system matched to the gate weight.
What Gate Installation Costs in Crystal River
| Item | Typical range in Crystal River |
|---|---|
| Manual driveway gate (single swing) | $1,800 – $6,000 |
| Automatic swing gate with opener | $3,000 – $8,500 |
| Sliding gate with track system | $3,500 – $9,000 |
Do I need a permit for gate installation in Crystal River?
Most residential gate installations in Crystal River do need a permit, especially for automatic gates with electrical runs and any gate over six feet tall. We handle the permit paperwork as part of the job, so you don’t have to pull anything yourself. Call (866) 976-0095 to ask about your specific property.
Can you install a gate on a canal-front lot where the soil stays wet?
Yes. We use deeper footings with rebar and sometimes helical piers on canal-front lots in Crystal River where the soil stays saturated. The gate has to be engineered for that ground, not just bolted in and hoped for.
Brands We Service in Crystal River
We work on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, and we stock common boards, limit switches, and safety sensors for those brands locally so we’re not waiting on a parts truck. See our brands for the full list we service in Crystal River.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Crystal River, FL
| Service | Typical range in Crystal River |
|---|---|
| Manual gate repair | $180 – $340 |
| Hinge replacement (2 hinges) | $150 – $300 |
| Post reset or replacement | $250 – $650 |
| Gate alignment and sag correction | $120 – $250 |
| Electric gate opener repair | $180 – $600 |
| Control board replacement | $250 – $750 |
| Safety loop replacement | $350 – $900 |
| Keypad or intercom replacement | $150 – $450 |
| Manual driveway gate installation | $1,800 – $6,000 |
| Automatic swing gate with opener | $3,000 – $8,500 |
| Sliding gate with track system | $3,500 – $9,000 |
In Crystal River, prices push toward the higher end on canal-front properties in 34428 and 34429 because we’re often cutting out salt-corroded hardware and rebuilding footings that storm surge has undercut. Every job gets a written quote before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Crystal River
We cover all of Crystal River and the surrounding communities within about 30 minutes of the Kings Bay area. That includes the canal-front streets off Fort Island Trail, the older ranch neighborhoods between US-19 and the water, and the outlying communities where gate hardware tends to get neglected until it fails.
- Crystal River city limits (34423, 34428, 34429)
- King’s Bay and canal-front streets
- Fort Island Trail area
- Pine Ridge
- North Crystal River and the US-19 corridor
Our typical response time for gate repair calls in Crystal River is same-day or next-day depending on when you call and where the parts are. We stage with the common boards and sensors for this area, so we’re not driving back to Tampa mid-repair.
Service Area – Cities Near Crystal River
Beyond Crystal River, we cover the neighboring communities along the Gulf Coast and inland toward the Withlacoochee State Forest. That includes Homosassa Springs, FL, Lecanto, FL, Black Diamond, FL, and Pine Ridge, FL. If your gate is anywhere within 45 minutes of Crystal River, call (866) 976-0095 and we’ll confirm coverage for your street.
Serving Crystal River, FL — Our Local Coverage Area
We’re based in the Crystal River area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Crystal River
For most Crystal River gate repair calls, we schedule same-day or next-day service. Our technicians are dispatched from the Tampa area but stage common parts for the Crystal River market so we’re not two days out waiting on a board. Call (866) 976-0095 and we’ll give you a real arrival window.
Many of Crystal River’s newer gated communities and some canal-front neighborhoods do have HOA or deed restrictions on gate style, height, and color. We check with the association before ordering material so you don’t install a gate that gets flagged. You’ll know the requirements before you spend a dollar.
Yes. We run the power, low-voltage wiring, safety loop, and keypad as part of the automatic gate installation. You don’t need a separate electrician for a standard residential setup. We’ll also pull the permit and schedule the inspection.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Crystal River Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman