Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Edgewood, FL
Gate installation in Edgewood has to account for something you won’t see in most Orlando-area suburbs: lot lines that sit uncomfortably close. Homes here were largely built between the 1950s and 1990s, and many driveway and side-yard gates swing or slide through clearances of only a few feet. Tampa Gate Company has served Edgewood since 2013, and we know that a gate here is rarely a clean, wide-open commercial job. It’s a compact residential setup where the swing radius, fence line, and neighbor’s property all have to be respected. Call (866) 976-0095 when you need a gate specialist who works inside those constraints every week.
Why Edgewood Homes Are Different
Edgewood is a small residential enclave surrounded by Orlando, and the lots are tight. Most driveways and side yards sit within a few feet of the neighboring property, which changes how gates get installed and repaired. A swing gate that would work fine on an acreage lot in an outlying suburb can cross a property line here if it isn’t planned carefully. Technicians working in Edgewood routinely deal with compact, low-clearance setups, often retrofitting gates onto existing driveway openings rather than expanding them.
The housing stock reinforces that reality. Many Edgewood homes are single-family detached houses built from the 1950s through the 1990s, with masonry-block or wood-frame construction and privacy fences or pool enclosures that have been there for decades. Gates are typically original wood or metal driveway gates and pool safety gates integrated into those fences. Central Florida’s sun and humidity have had years to work on them. Metal rusts, wood warps, hinges seize, and the sandy soil shifts posts enough to throw gates out of alignment. In Edgewood, a gate job usually means working on something that started its life 30 or 40 years ago, not swapping out a near-new panel.
Styles & brands we work with
Our Main Edgewood Services
Two services account for most of what Edgewood homeowners call us about. Both live on their own detailed pages, but here’s the short version of what each one involves in this specific city.
Gate Repair in Edgewood
Most Edgewood repair calls are about gates that have stopped closing correctly, started dragging, or refuse to latch. On a tight lot, a gate that won’t close is more than an annoyance. It’s a pool safety issue or a privacy gap facing directly into a neighbor’s yard. We work on the hinge, the post, the frame, the latch, and the track, and because so many Edgewood gates are original to 1970s and 80s homes, the repair often means retrofitting modern hardware onto an older frame rather than just tightening a screw. See the full breakdown on our Gate Repair in Edgewood page.
Electric Gate Repair in Edgewood
Electric gates in Edgewood have the same space constraints as manual ones, plus the extra complexity of a motor, control board, and safety loop. Humidity and afternoon thunderstorms shorten the life of electrical components here, and a gate that won’t respond to a remote or keypad is often a control board issue, not a bad motor. We diagnose the whole system, not just the obvious part. Learn more on our Electric Gate Repair in Edgewood page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Edgewood
A new gate installation in Edgewood is rarely a simple swap. The original gate on a 1970s or 80s home was built for a different set of expectations, and current pool safety codes now require self-closing, self-latching hardware that many older gates never had. The specific problem this service solves here is fitting a code-compliant, properly swinging or sliding gate onto an existing fence line and driveway opening that was never designed for tight clearances. For the wider picture on what we install, our Gate Installation hub covers the full range of systems.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a manual gate, or you need controlled access for a pool, driveway, or side yard that currently has none.
What it costs in Edgewood
Electric gate installation in Edgewood typically runs $4,100 to $38,000 depending on the gate style, motor, and access-control components.
How we do it
We measure the opening, confirm swing or slide clearance against the property line, set posts or tracks, mount the gate and operator arm, wire the control board, and program remotes, keypads, and safety loops, then test the full cycle repeatedly.
Driveway Gate Installation
Signs you need it
Your driveway opens directly to the street with no barrier between the road and your front yard or garage, and you want privacy or a defined property line.
What it costs in Edgewood
A gate installation in Edgewood generally falls between $1,300 and $13,000, with driveway gates on the higher end when they include an operator.
How we do it
We survey the driveway width and soil conditions, set posts in concrete sized for the gate weight, hang the gate with clearance for the slope, and attach the latch or operator so it holds alignment through Edgewood’s wet-dry seasonal shifts.
What Gate Installation Costs in Edgewood
| Item | Typical range in Edgewood |
|---|---|
| Gate installation | $1,300 – $13,000 |
| Electric gate installation | $4,100 – $38,000 |
| Automatic gate installation | $4,100 – $38,000 |
Can you replace an old pool gate in Edgewood and bring it up to code?
Yes. That’s one of the most common Edgewood installations we handle. We replace the gate and hardware so it meets current pool barrier requirements, including self-closing and self-latching mechanisms. Call (866) 976-0095 for a written quote before any work starts.
Do you need permits to install a driveway gate in Edgewood?
Permit requirements vary by project scope and location. We’ll confirm what Edgewood or Orange County needs for your specific installation before work begins. Call (866) 976-0095 and we’ll walk through it.
Brands We Service in Edgewood
We service most gate brands found in Edgewood, including Mighty Mule, LiftMaster, and FAAC systems. Whether it’s a residential Mighty Mule opener or a LiftMaster commercial board, our technicians recognize the system on sight. For the full list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Edgewood, FL
| Service | Typical range in Edgewood |
|---|---|
| Gate repair | $220 – $1,900 |
| Electric gate repair | $260 – $8,200 |
| Gate installation | $1,300 – $13,000 |
| Electric gate installation | $4,100 – $38,000 |
| Automatic gate installation | $4,100 – $38,000 |
| Wrought iron gate repair | $240 – $960 |
| Wood gate repair | $200 – $740 |
| Automatic gate opener repair | $250 – $690 |
Two things push Edgewood prices toward the upper end: the tight clearances that make post placement and swing radius measurements more time-consuming, and the age of the original gate hardware, which often needs retrofitting rather than a direct swap. Every quote is agreed before work begins, so the number we give you is the number you pay.
Neighborhoods We Serve in Edgewood
Edgewood is compact, so our technicians cover the entire city without the long travel times that spread out service in bigger Orlando suburbs. Typical response for most Edgewood repair calls is same-day or next-day, depending on when the call comes in and how quickly parts are needed.
- Lake Edgewood area
- Hoffner Avenue corridor
- South Orange Avenue border
- Holden Avenue side streets
- Jerusalem Drive neighborhoods
Service Area – Cities Near Edgewood
Our technicians live and work across central Orange County, which keeps us close to Edgewood and the surrounding communities. We regularly handle gate work in Belle Isle, FL, Pine Castle, FL, Sky Lake, FL, and Holden Heights, FL. If your gate is acting up and you’re near any of these areas, call us.
Serving Edgewood, FL — Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Edgewood
Most Edgewood repair calls get same-day or next-day service. The city is small enough that we can route a technician there without the scheduling delays common in larger metro areas. Call (866) 976-0095 and we’ll give you an honest arrival window based on what’s already on the schedule.
We work with homeowners who need gates that match a specific HOA standard for material, color, or height. We’ll ask about your HOA’s requirements during the estimate so the installed gate won’t create a compliance problem later. Bring any written specs and we’ll work to them.
Yes. We cover all of Edgewood’s 32890 ZIP code and the immediately surrounding Orlando neighborhoods. If you’re not sure whether you’re inside our service area, call (866) 976-0095 and we’ll confirm. The estimate is free either way.
If your Edgewood gate is dragging, rusted, off its track, or refusing to open, call Tampa Gate Company at (866) 976-0095 for a free estimate. We’ll diagnose the problem, give you a written price, and get your gate back to secure, working order.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edgewood Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Jessica Yang"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller