Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lake Placid, FL
Gate installation in Lake Placid usually falls into two categories: a new automatic opener on an existing driveway gate, or a complete ground-up build for a rural or ranch property. Tampa Gate Company has served Lake Placid since 2013, and most of our work here centers on long-run driveway entries and pasture access points on sandy lots around the 33852 and 33862 ZIP codes. If you need a gate that stands up to summer humidity and hurricane-season wind, call (866) 976-0095 for a free estimate.
Why Lake Placid Homes Are Different
Lake Placid isn’t a dense subdivision town. Much of the gate work we do here is on older single-family homes, manufactured homes, and rural ranchettes spread out along sandy scrub roads. Gates sit at the end of long driveways off County Road 29, out toward the 33862 corridor, or on small citrus and ranch parcels where the entry is as much for livestock control as it is for security. Many of these gates are owner-installed or custom-built from tube steel, chain-link, or wood. They were often welded or set years ago, sometimes without concrete footings sized for Florida’s sandy soil.
The humid subtropical climate works against metal and electronics year-round. Heavy summer rains and high humidity corrode hinges, latches, and opener circuit boards. Hurricanes and tropical storm winds push long gates out of plumb and stress hinges on wide double-swing setups. Dry spring sun cracks wood gates and breaks down exposed seals on operators. And because so many Lake Placid properties are seasonal, a gate problem often isn’t discovered until the snowbirds return in October or November. That’s when our repair schedule fills up fast.
Styles & brands we work with
Our Main Lake Placid Services
Two services account for most of our calls in Lake Placid: gate repair and electric gate repair. Here’s what each involves locally.
Gate Repair in Lake Placid
A sagging swing gate, a sliding gate that binds halfway, a latch that won’t catch. Most of these start as hardware problems: rusted hinges, worn rollers, posts shifting in sandy soil. We repair the gate in place when we can, which matters on custom-built farm and ranch gates that aren’t a standard size. We carry heavy-duty replacement hinges, latches, and hardware rated for outdoor Florida use. If your gate won’t close square or the post is leaning after a storm, the right call is a specialist who recognizes the frame and hinge system on sight. See our full breakdown at Gate Repair in Lake Placid.
Electric Gate Repair in Lake Placid
Electric gate acting up? We diagnose the motor, the control board, and the safety loop, not just the obvious symptom. Lake Placid’s humidity and lightning storms are hard on opener electronics, and a gate that sat unused through a summer of rain often has corroded connections or a dead battery when the owner returns in fall. We work on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, and we repair boards and sensors rather than defaulting to replacement. Details at Electric Gate Repair in Lake Placid.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Lake Placid
Gate installation in Lake Placid usually means building for sand, wind, and long stretches of time with nobody on the property. The older homes and rural ranchettes here rarely have production-subdivision gate setups. Instead, we’re sizing a custom tube-steel or chain-link driveway gate to open over a sandy drive, or we’re converting a manual pasture gate to an automatic opener that has to sit through a humid summer and still work in November. We quote the full job upfront, including posts, hardware, opener, and any electrical work, and the price is agreed before any work starts. For a deeper look at the service, see Gate Installation.
Automatic Gate Installation
Adding an opener to an existing gate, or installing a complete automated gate system on a new build.
Signs you need it
You’re opening and closing a long driveway gate by hand, or the property sits empty for months and you want to control access remotely.
What it costs in Lake Placid
Automatic gate installation in Lake Placid typically runs $4,350 to $9,250, with most jobs landing near $6,400.
How we do it
We survey the gate and soil, spec the right opener, set or reinforce the posts, mount the operator and any keypads or sensors, and then test the full cycle, including safety reversal.
Electric Gate Installation
Installing a fully motorized gate system, including the operator, control board, safety loops, and access control wiring.
Signs you need it
You’re building a new driveway entry, replacing a manual gate that’s become a hassle, or upgrading an old opener to a modern system with keypad and intercom access.
What it costs in Lake Placid
Electric gate installation in Lake Placid typically ranges from $4,580 to $9,450, depending on operator type and gate length.
How we do it
We install the gate and operator, run power to the location, mount the control board and safety sensors, set the travel limits, and verify the gate reverses properly on obstruction.
Driveway Gate Installation
Building and installing a new driveway gate from scratch, including the frame, posts, and hardware.
Signs you need it
There’s no gate on the driveway now, or the existing gate is rotted, bent, or the wrong size for the opening.
What it costs in Lake Placid
Driveway gate installation in Lake Placid starts around $3,550 for a basic single swing gate and runs upward from there based on material and width.
How we do it
We measure the actual driveway width and slope, set concrete footings sized for sandy soil, weld or assemble the gate, hang it true, and adjust the latch and hinges for a clean close.
Sliding Gate Installation
Installing a cantilever or track-style sliding gate, common on wider rural driveway openings where a swing gate would be impractical.
Signs you need it
The driveway opening is too wide for swing leaves, or the ground slopes where a swinging gate would drag.
What it costs in Lake Placid
Sliding gate installation in Lake Placid typically runs $5,250 to $10,800, with heavier steel frames and longer runs pushing toward the upper end.
How we do it
We set the steel posts or track, build or hang the gate panel, install the rollers and guide hardware, and adjust everything so the gate moves smoothly without binding.
What Gate Installation Costs in Lake Placid
| Item | Typical range in Lake Placid |
|---|---|
| Basic single swing driveway gate | $3,550 – $4,800 |
| Automatic gate system (opener on existing gate) | $4,350 – $8,650 |
| Complete electric sliding gate | $5,750 – $10,800 |
Do I need a permit for a gate in Lake Placid?
It depends on whether you’re adding an automatic opener with electrical work or just hanging a manual gate. We handle the conversation with Highlands County on the electrical and setback side.
Can you install a gate while I’m up north?
Yes. Many of our Lake Placid customers coordinate installation from out of state. We confirm measurements, send photos at each stage, and the gate is done when you arrive for the season. The price is locked before anyone turns a wrench.
Brands We Service in Lake Placid
We carry replacement parts for LiftMaster, FAAC, BFT, and Mighty Mule operators, which covers most of what’s installed around Lake Placid and the 33862 corridor. That local stock means a board or sensor swap usually happens the same visit, not after a week of waiting. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lake Placid, FL
| Service | Typical range in Lake Placid |
|---|---|
| Gate repair (hinges, latch, sag, realign) | $185 – $575 |
| Electric gate repair (diagnostic and component) | $240 – $700 |
| Control board replacement | $400 – $1,250 |
| Safety sensor or photo-eye replacement | $220 – $475 |
| Gate opener replacement | $850 – $2,600 |
| Basic single swing driveway gate installation | $3,550 – $4,800 |
| Automatic gate installation | $4,350 – $9,250 |
| Electric gate installation | $4,580 – $9,450 |
| Sliding gate installation | $5,250 – $10,800 |
What pushes a Lake Placid quote up is usually the access: a long driveway far off the paved road, a gate post set in loose sand that needs a larger concrete footing, or a custom-built gate that needs fabrication rather than a standard panel swap. Our price is quoted and agreed before any work starts, so you’ll never get a surprise invoice.
Neighborhoods We Serve in Lake Placid
We cover all of Lake Placid and the surrounding Highlands County roads, with no extra charge to come out to the 33852 and 33862 ZIP codes. Our typical response for a repair call in the area is same day or next morning depending on the route.
- Placid Lakes
- Lake Placid town center
- Lake June Pointe
- Sylvan Shores
- Lorida (33862 corridor)
Service Area – Cities Near Lake Placid
We run regular routes from our Tampa base down through Highlands County, and Lake Placid sits in the middle of that coverage area. If you’re just outside town, we also serve Sebring, FL, Avon Park, FL, Zolfo Springs, FL, and Frostproof, FL. Call (866) 976-0095 and we’ll tell you when we can be out.
Serving Lake Placid, FL — Our Local Coverage Area
We’re based in the Lake Placid area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Placid
Most Lake Placid repair calls get a same-day or next-morning visit. We route our Highlands County trips to group jobs by area, so if you’re out toward Lorida or Placid Lakes, you’re on a route that runs weekly, not a one-off dispatch. Call (866) 976-0095 and we’ll confirm the schedule.
Yes. A large share of our Lake Placid work is on ranch and small-farm parcels: tube-steel pasture gates, chain-link yard gates, and long rural driveway entries. We repair and replace hinges, latches, and posts sized for stock, not just residential hardware.
Yes. On a Lake Placid installation or repair, one gate technician runs the job start to finish. You’re not handed between a generalist crew and a sub. The person who measures and quotes is the one who installs or repairs, which matters on custom rural gates.
If your gate is sagging, stuck, or completely dead, call Tampa Gate Company at (866) 976-0095 for a free estimate. We’ll tell you what it costs before any work begins, and we repair first. Replacement is only the recommendation when repair isn’t the right answer.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Placid Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris