Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Dunedin
Electric gate repair in Dunedin, FL typically runs $185 – $485 for most residential service calls, with control board replacements landing between $250 – $600 depending on the operator. If your gate is stuck, grinding, or refusing to respond to the remote, we can usually diagnose it in a single visit. Call (866) 976-0095 and you’ll reach a gate specialist, not a dispatcher juggling six trades.
We know Dunedin’s streets, its canal-front properties, and the way salt air eats gate hardware years ahead of schedule. That matters when a failed operator on the Causeway side is not just an inconvenience, it’s a gap in your security that needs a permanent fix, not a band-aid.
Why Tampa Gate Company Is Dunedin’s Preferred Electric Gate Repair Company
We work on gates all day, every day. No HVAC calls, no plumbing jobs, no garage door side work. That singular focus means our technicians recognize your LiftMaster, FAAC, Mighty Mule, or BFT system on sight and carry the parts that actually fit it. Dunedin homeowners call us after a generalist has already guessed wrong once.
Noel Carver founded Tampa Gate Company as a gate-only operation, and that decision shapes every repair we do in Dunedin. When a slide gate on a shared right of way off Bayshore Boulevard seizes at 7 a.m., the property owner doesn’t need a multi-trade shop that might arrive between noon and four. They need someone who has worked on the same tight lots, the same settled post footings, and the same salt-pitted racks. That’s the work we do every week.
Our repair-first approach is straightforward. We quote the repair price before any work begins, and we stand behind honest recommendations. If a corroded 1970s gate in the 34698 ZIP is beyond saving, we’ll tell you. But replacement is a recommendation we make only when repair is the wrong answer.
Styles & brands we work with
Gate Access Control in Dunedin
Gate Access Control in Dunedin means integrating the operator, keypad, intercom, safety loops, and remote or phone-based entry so the gate opens exactly when it should and stays locked when it should not. Dunedin homeowners with canal-front properties or homes near the Dunedin Causeway often need this service because salt air shortens the life of keypad contacts and loop detector wiring. A basic access control repair in Dunedin runs $165 – $325. Adding or replacing a keypad typically costs $120 – $250, while intercom upgrades for private drives fall between $350 – $750 depending on the system.
Keypads And Remotes That Quit
Keypads mounted near the coast fail faster because salt fog creeps into the membrane and corrodes the contact traces. We replace the keypad, re-seal the housing, and often run a fresh low-voltage line if the original has gone green inside its jacket. Remote programming is part of the job, and we always test the gate’s full cycle before we leave.
Loop Detectors And Safety Sensors
Dunedin’s sandy soil shifts, and loop detectors buried in the drive can fail when the asphalt or paver bed moves even half an inch. A dead loop means the gate won’t auto-close or won’t hold for exiting vehicles. We diagnose the loop or photocell problem on site and replace the component, not the whole system.
Commercial Gate Operator in Dunedin
Commercial Gate Operator repair in Dunedin covers slide and swing operators on apartment complexes, marinas, storage facilities, and HOA entries, especially along the Bayshore and Causeway corridors where DoorKing and FAAC units dominate. These systems run hundreds of cycles a day. A commercial slide operator replacement in Dunedin typically runs $1,200 – $2,800 installed, while a control board repair on an existing operator lands between $300 – $700. We service the operator, the safety loops, the keypad or telephone entry unit, and the power run as one integrated system.
Slide Operators That Bind Or Trip
On Dunedin’s barrier-island edge, we frequently see slide gates that drift or bind because the post footing has settled into sandy soil. The operator then draws more current, the board overheats, and the gate trips its thermal protection. We re-level the track, free the rack, and replace the damaged board rather than condemning the operator.
Access Control Retrofits
Commercial properties near Dunedin’s downtown often have older keypad systems that no longer integrate with modern remotes or phone entry. We retrofit the access control while keeping the existing operator when it’s still sound. That saves thousands over a full replacement and keeps the gate running during the work.
Trusted Brands We Service in Dunedin
We work on LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, along with Viking, Linear, Ghost Controls, DoorKing, and Elite. In Dunedin, that brand depth matters because we know which operators handle salt exposure better than others, and we stock the local parts that keep your repair moving. When your FAAC board fails on a Friday, you don’t want a three-day wait for a part that ships from out of state. Our truck stock is built around what Dunedin’s gates actually use. Your gate is back to secure, working order faster because of it.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Dunedin Homes
- Salt-fog corrosion on the Causeway side. Gate hinges and aluminum frames pit within five to seven years from airborne salt fog, far shorter than the 12 – 15-year life of identical hardware east of US-19. We see seized racks and latches where inland Pinellas gates have years of service left.
- Settled post footings from sandy soil. Along the barrier-island edge, post footings shift and roll-track alignment drifts, causing slide gates to bind and operators to overheat. A simple sag correction won’t hold if the footing itself has moved.
- Corroded fasteners in 1950s – 70s concrete block. Original steel and aluminum fasteners rust inside the block, making hinge post repairs on mid-century ranch homes a slow extraction job, especially in tight shared driveways where there’s barely room to work.
- Control boards cooked by shorted safety loops. Dunedin’s rainy-season downpours and irrigation runoff can saturate loop wiring and short the operator board. We test the loop resistance before replacing the board so the new one doesn’t fail the same way.
Pricing for Electric Gate Repair in Dunedin, FL
Most Dunedin residential electric gate repairs fall between $185 and $485. A hinge post extraction and re-seating on an older concrete-block ranch home runs $275 – $550. Control board replacements range $250 – $600. Slide gate track re-alignment on settled footing typically costs $200 – $450. Commercial operator repairs start around $300 and scale with the operator size. The price is quoted and agreed before any work starts, and our estimates are free. No invoice surprises. If a gate is beyond repair, we’ll show you why and give you a written replacement price, but we won’t push replacement when a repair is the right call.
We Also Serve Cities Near Dunedin
Our Electric Gate Repair team also covers Clearwater, Belleair, Greenbriar, and Belleair Bluffs. If you’re just outside Dunedin or managing a property in a neighboring municipality, the same gate-only specialists can be on site quickly. For Dunedin-specific service or any of these nearby areas, call (866) 976-0095.
Serving Dunedin, FL — Our Local Coverage Area
We’re based in the Dunedin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Dunedin
The salt fog carried by onshore Gulf breezes settles into gate hinges, aluminum frames, and operator boards along the Causeway and Honeymoon Island side, and that airborne salt pits hardware in five to seven years instead of the inland Pinellas norm of twelve to fifteen. The corrosion starts inside the components, where no visual inspection catches it early. Coastal Dunedin electric gate repair is a corrosion-remediation job first and a mechanical one second. Call (866) 976-0095 and we’ll assess your salt exposure and recommend hardware rated for it.
Yes. We work on shared driveways and rights of way throughout Dunedin, and we plan the repair so one vehicle path stays clear the entire time. On a canal-front concrete-block ranch off the Dunedin Causeway corridor, we recently freed a seized rack and pinion on a LiftMaster slide gate using a footing barely wider than the gate itself. The neighbor’s vehicle access never went dark. We stage parts and tools on one side, work in sections, and keep the driveway usable. Call (866) 976-0095 for a repair plan that respects the shared access.
Yes, but it’s a slow extraction, not a quick swap. The steel fasteners in those mid-century Dunedin homes have rusted inside the block, and drilling or prying too fast will spall the concrete. We use penetrating oil, controlled torque, and when needed, we cut the fastener and re-anchor with stainless hardware sized for the existing hole. The wall stays intact. Call (866) 976-0095 for an estimate on hinge post repair.
Your gate needs a monitored safety loop or a photocell system that reverses the gate if a vehicle or person is in the path, and it needs a current-sensing or obstruction-sensing operator. Salt air absolutely affects this hardware. Photocell lenses fog and pit, loop wire insulation breaks down faster near the coast, and corroded housings compromise the safety circuit. We inspect and replace safety hardware as part of every Dunedin repair. Call (866) 976-0095 to have your safety system tested.
Yes. We service DoorKing and FAAC commercial operators throughout Dunedin, including marina, storage, and HOA properties near the water. We carry control boards, limit switches, and loop detectors for these brands, and we know how salt exposure affects their enclosures and internal boards. Your gate is back to secure, working order, and your tenants or residents keep their access. Call (866) 976-0095 for a commercial operator service call.
Written by Noel Carver, Owner at Tampa Gate Company, serving Dunedin’s electric gate repair needs with gate-only specialists and nine-brand service depth.