Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Apopka
A broken gate in Apopka isn’t something you put off until next month. It’s a security problem, an access problem, and a daily frustration. Tampa Gate Company specializes in gate repair only, which means when you call us at (866) 976-0095, you’re talking to someone who diagnoses gate systems all day, every day. We work throughout Apopka’s 32703, 32704, and 32712 zip codes, and we’re familiar with the mix of older in-town homes west of the lake and newer subdivisions pushing toward the rural edge. Call today, tell us what your gate is doing, and we’ll schedule a repair visit with a straight answer on what it’ll take to fix it.
Why Tampa Gate Company Is Apopka’s Preferred Gate Repair Company
Most Apopka homeowners don’t need a general contractor who “also does gates.” They need someone who recognizes the system on sight, knows which parts fail on which brands, and doesn’t waste a service call guessing. That’s what we do. We’re a gate-only company, so our techs carry gate-specific parts, not a truck half-full of plumbing fittings and the other half dedicated to HVAC. When we arrive at a property in Apopka, we’re already familiar with the region’s sandy soil, the way gates settle after heavy rain, and the legacy operators still running on older LiftMaster and FAAC boards. That local familiarity means faster diagnosis and fewer return trips.
Led by Noel Carver, our team works on both manual and motorized systems. We don’t push replacement when a repair is the right call. We’ve rebuilt hinge posts, re-hung sagging gates, and replaced control boards on systems that other companies said were done for. If you’re in Apopka and your gate is binding, drifting, or dead at the keypad, call (866) 976-0095 and describe what it’s doing. We’ll tell you honestly what we think is wrong and what it’ll cost to make it right before we ever touch a tool.
Styles & brands we work with
Metal Gate Repair in Apopka
Metal Gate Repair in Apopka usually means steel or aluminum swing gates, often on the larger residential lots common around the 32712 corridor and older in-town parcels west of Lake Apopka. These gates carry a lot of weight on two hinge points, and when the posts shift in sandy soil after summer downpours, the gate sags, binds at the latch, or scrapes the ground. We re-plumb posts, rebuild hinge mounts, straighten frames, and replace worn hardware so the gate swings true again. A typical hinge and alignment job in Apopka runs $180 – $380 depending on post condition and gate weight. Full re-hang work with new fabricated hinges can run $400 – $800 on heavier gates.
Hinge and Post Repair in Apopka
Hinge failure is the most common metal gate repair we see across Apopka. The combination of sandy soil and heavy summer rain causes posts to lean and settle, which puts uneven load on the hinges. We don’t just swap hinge bolts. We re-plumb the post first, pack the footing properly, and then re-hang the gate so it sits level.
Gate Realignment and Lock Repair
After a storm, a metal gate can be racked just enough that the latch no longer lines up, or the gate scrapes the driveway on the swing. We straighten frames, adjust the hinge geometry, and align the latch and lock so the gate actually closes and stays closed. That includes strike-plate alignment and lock replacement when the old hardware has worn beyond adjustment.
Wood Gate Repair in Apopka
Wood Gate Repair in Apopka handles the full range of rot, hinge pull-out, and warping that comes with wood gates exposed to Florida humidity and hurricane-season rain. Wood gates on older Apopka homes and pool enclosures tend to rot first at the hinge and latch points, where water sits and fasteners loosen. We repair or replace rotted frame members, sister in new rails where the old wood has failed, and install longer structural screws so hinges hold in solid material rather than pulling out. Smaller repairs like hinge remounting and brace replacement in Apopka typically run $150 – $350. Rebuilding a rotted section or replacing a gate leaf starts around $300 and can go to $700 depending on wood type and gate size.
Frame and Brace Repair
The diagonal brace on a wood gate does the real structural work. When it loosens or rots, the whole gate drops out of-square. We’ll replace the brace, tighten the frame joints, and re-square the gate before remounting it. That’s a repair a lot of companies skip in favor of selling you a new gate.
Hinge and Latch Remounting
Wood gates fail at the fasteners more often than anywhere else. When a hinge pulls out of rotted wood, tightening the same screw isn’t a fix. We cut out the bad section, install solid blocking, and remount the hinge so it carries the gate’s weight the way it should.
Trusted Brands We Service in Apopka
We service systems built on Mighty Mule, LiftMaster, FAAC, and BFT, among others. Most Apopka homes and small commercial properties use one of these brands for swing and slide operators, and we know their failure patterns, their control boards, and their part compatibility. Older LiftMaster and FAAC boards fail in predictable ways after years of Florida humidity and surge events. Instead of guessing, we identify the board revision, confirm the fault, and quote a replacement or repair with the correct part. That kind of brand familiarity is why our Gate Repair work gets done right the first time, without ordering wrong parts and waiting another week.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Apopka Homes
- Sandy-soil post heave after summer downpours. Posts settle and lean within days after heavy rain, throwing the gate out of alignment. We re-plumb the post and re-hang the gate, not just shim the hinges.
- Obsolete control boards on legacy operators. Surge events and humidity kill older LiftMaster and FAAC boards in Apopka more often than mechanical failures do. We test the board, check the safety loop, and tell you whether a repair or board replacement is the smarter spend.
- Worn hinge posts on aging steel gates. Gates installed 15 or 20 years ago on original posts usually sag by the time we’re called. We rebuild the post footing, replace the hinges, and set the gate back to square.
- Wood rot at hinge and latch points. Apopka’s humidity never really lets up, and wood gates pay for it at every fastener. We repair the rotted section properly rather than lag-bolting into mush.
Pricing for Gate Repair in Apopka, FL
We charge honest, line-item pricing for gate repair in Apopka. Most hinge and alignment repairs land between $180 and $380. Wood gate repairs, depending on rot and frame condition, typically run $150 to $350 for smaller fixes and $300 to $700 for structural rebuilding. Control board replacements run $250 to $600 parts and labor, depending on the operator brand and board revision. A full operator replacement normally runs $800 to $1,600 installed. Spring and gate re-hang projects with post work can sit higher. Every quote is written before work starts, and we don’t add surprises to the invoice after the fact. Call (866) 976-0095 for a free estimate and a straight answer.
We Also Serve Cities Near Apopka
Our gate repair coverage extends beyond Apopka’s own zip codes. We regularly serve South Apopka, Clarcona, Zellwood, and Forest City. If you’re on the edge of any of those areas, just call and ask. For more about our full coverage area around Apopka, give us a ring at (866) 976-0095.
Serving Apopka, FL — Our Local Coverage Area
We’re based in the Apopka area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Apopka
Your gate keeps sagging because the post has settled in Apopka’s sandy soil, not because the hinge adjustment failed. Re-tightening hinges on a post that has already leaned just re-clamps the gate to a bad footing. The proper repair is to re-plumb the post, pack the footing, and then re-hang the gate level. That’s a repair we do regularly across Apopka’s 32703 and 32712 areas after heavy rain cycles. Call (866) 976-0095 and we’ll tell you whether your gate needs a full re-plumb or a simpler re-hang.
Yes, in most cases you can retrofit modern safety photocells and edge sensors onto a 1990s operator, provided the control board can accept the inputs. Some older LiftMaster and FAAC boards have no auxiliary safety terminals, which means retrofitting would require a board upgrade. We’ll check your exact board revision and tell you what’s possible and what it costs. In many Apopka homes, a $250 – $600 board replacement brings a legacy operator up to current safety standards for far less than a full system replacement.
You don’t, and that’s fine, because we can tell you over the phone or on a quick service call. A gate that resets and works for a few days before failing again usually has a dying board. A gate that stops once after a power blink and works after a breaker reset might be fine. We test voltage at the board, check the safety loop and keypad inputs, and confirm the fault before quoting a board replacement. In Apopka, surge damage after afternoon lightning storms is a common board killer.
Yes. We cut out the rotted section, install solid blocking or a new rail, and remount the hinge in sound wood with structural fasteners. This is one of the most common wood gate repairs we do in Apopka, especially on older properties where gates have been exposed to decades of wet summers. The repair holds because the hinge is anchored into new material, not back into rot. We’ll quote the repair before any cutting starts.
We service Mighty Mule, LiftMaster, FAAC, and BFT systems, along with several other major brands. Whether your Apopka property has a swing gate operator on a LiftMaster board or an older FAAC unit that’s stopped responding, we carry the parts knowledge to diagnose and repair it without handing you a “must replace” quote as the only option. Call (866) 976-0095 and tell us what brand and model you have. We’ll tell you what we stock and what it’ll take to get your gate working again.
Written by Noel Carver, Owner at Tampa Gate Company, serving Apopka and surrounding Central Florida communities.