Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Hudson, FL
Gate installation in Hudson, FL usually means a driveway gate, a pool-enclosure gate, or a canal-front property gate built to handle salt air and storm wind. Most homes here date from the 1970s through the 1990s, and plenty of the gates still standing are original to those builds. That means we’re frequently replacing rusted mild-steel hinges and seized operator housings, or installing a new gate from scratch when the old one isn’t worth saving. Tampa Gate Company has served Hudson since 2013, and our focus is gates only: manual, electric, sliding, swing, driveway, and pool. Call (866) 976-0095 for a free estimate.
Why Hudson Homes Are Different
West of US-19, Hudson is canal country. Salt-laden air moves through those streets year-round, and it shows up as pitting and white corrosion on gate hinge pins, track rollers, and operator housings within a couple of seasons. A gate tech working Hudson sees corrosion and storm damage as often as motor failure. That’s the reality of coastal Pasco County, and it changes how we spec every job: stainless hardware where it matters, sealed operator housings, and control boards mounted away from direct weather exposure where possible.
The housing stock shapes the work too. Hudson is heavy with 1970s-1990s Florida ranch homes and manufactured homes, many on oversized lots with double swing or sliding driveway gates. Canal-front properties often have the same setup, plus pool-cage gates that get hammered by wind-blown debris after every named storm. Older installs frequently still have original mild-steel hinges, stamped tracks, and pre-2000 operators that rust and seize far sooner than modern parts. Summer lightning across 34667, 34669, and 34674 also takes out gate control boards with regularity. A Hudson gate job is as much about planning for the environment as it is about the gate itself.
Styles & brands we work with
Our Main Hudson Services
When Hudson homeowners call us, it’s usually one of two situations: a gate that won’t move, or a motorized gate that moves when it shouldn’t, won’t when it should, or sits dead after a storm. We cover both sides of that coin.
Gate Repair in Hudson
Gate repair in Hudson tends to be corrosion work. Hinges seize, track rollers pit, and swing gates start dragging against salt-crusted posts. We repair first, replacement is only the recommendation when repair isn’t the right answer. Our techs carry the common hardware for 1970s-1990s ranch and manufactured-home gates, so many repairs finish in a single visit. If your gate sags, binds, screeches, or won’t latch, see Gate Repair in Hudson for the full breakdown.
Electric Gate Repair in Hudson
Electric gate acting up? We diagnose the motor, board, and safety loop, not just the obvious. Hudson’s summer lightning season is hard on control boards, and salt air corrodes wiring connections and limit switches on canal-front properties. We work on LiftMaster, FAAC, BFT, Viking, Mighty Mule, and other major systems, and we can usually tell you over the phone whether it’s a board, a sensor, or a mechanical bind. Get the details on Electric Gate Repair in Hudson.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Hudson
Gate installation in Hudson usually means replacing a rusted 1980s swing gate on a ranch lot, or adding a motorized sliding gate to a canal-front driveway that was never built for one. Salt air and hurricane season mean the hardware spec matters more here than inland. We plan every Hudson install around corrosion resistance and wind load, not just curb appeal. For the complete scope of our installation work, visit Gate Installation. Here’s what we cover most in Hudson.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the truck to open a manual gate, or you already have an automatic gate that’s beyond rebuild and needs a full replacement.
What it costs in Hudson
Automatic gate installation in Hudson typically runs $1,800 – $6,500 depending on gate size, motor type, and whether we’re converting a manual gate or installing new.
How we do it
We survey the driveway, confirm swing or slide geometry, set the operator and safety loops, wire the board, and test full obstruction reversal before we leave.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rotted at the hinges, dragging across the concrete, or too far gone for another patch-up.
What it costs in Hudson
A new driveway gate in Hudson, including posts and hardware, generally lands between $1,500 and $4,500 for most residential lots.
How we do it
We remove the old gate and posts, set new posts in concrete, hang and square the gate, then mount the opener if you’ve chosen an automatic system.
Sliding Gate Installation
Signs you need it
Your driveway is tight on swing clearance, or you want a tracked slide gate that tucks along the fence line instead of arcing into the yard.
What it costs in Hudson
Sliding gate installation in Hudson typically runs $2,200 – $7,000 based on gate width, track length, and whether you need an electric operator.
How we do it
We lay the track or set cantilever rollers, build and hang the gate panel, align the rollers, and install the motor and safety edges when applicable.
What Gate Installation Costs in Hudson
| Item | Typical range in Hudson |
|---|---|
| Driveway gate (manual, single swing) | $1,500 – $4,500 |
| Automatic gate system (operator, loops, controls) | $1,800 – $6,500 |
| Sliding gate with track and hardware | $2,200 – $7,000 |
These ranges reflect typical Hudson residential jobs. Canal-front installs with long runs or custom widths push toward the higher end.
How long does gate installation take in Hudson?
Most residential gate installations in Hudson finish in one to two working days. Sliding gates with longer track runs or custom panels can take three. Weather delays from summer storms are the main variable we can’t control, but we schedule around the forecast when we can.
Do I need a permit for a gate in Hudson?
Pasco County may require a permit for certain gate installations, especially automatic systems with electrical connections. We’ll confirm local requirements before we start and make sure your job is done to county code. When a permit is needed, it’s included in our scope, not a surprise add-on.
Brands We Service in Hudson
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically. Because we’re a gate-only company, our trucks carry the most common control boards, sensors, and hardware for these brands, which means fewer second trips and faster turnarounds for Hudson customers. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Hudson, FL
| Service | Typical range in Hudson |
|---|---|
| Gate repair (hinges, rollers, latch, alignment) | $120 – $450 |
| Electric gate repair (board, sensor, loop) | $195 – $650 |
| Operator replacement (arm, motor, or full unit) | $450 – $1,800 |
| Driveway gate installation (manual) | $1,500 – $4,500 |
| Automatic gate installation | $1,800 – $6,500 |
| Sliding gate installation | $2,200 – $7,000 |
| Pool gate replacement (pedestrian swing) | $250 – $800 |
Hudson prices skew higher on canal-front properties where corrosion has spread from hinges to posts, or where wind damage has warped a gate panel. The price you’re quoted is the price you pay, agreed before any work starts.
Neighborhoods We Serve in Hudson
We cover all Hudson ZIP codes including 34667, 34669, and 34674, from the canal-front streets west of US-19 out to the ranch-lot neighborhoods east of Little Road. Most calls in this area get a same-week visit, and many repair jobs qualify for next-day scheduling.
- Sea Ranch on the Gulf
- Beacon Woods
- Fairway Oaks
- Lakeside Woodlands
- The Estates at Beacon Woods
Service Area – Cities Near Hudson
Tampa Gate Company serves Hudson and the surrounding Pasco County communities. If you’re just outside Hudson, you may be in our regular service area too. We work in Meadow Oaks, FL, Bayonet Point, FL, Jasmine Estates, FL, and Heritage Pines, FL. Call (866) 976-0095 to confirm coverage and schedule.
Serving Hudson, FL — Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hudson
Most Hudson repair calls get a same-week visit, and many qualify for next-day scheduling. If your gate is stuck open or won’t close, that’s a security problem, so we treat it as a priority. Call (866) 976-0095 and we’ll tell you the soonest available slot for your ZIP code.
Yes. Many Hudson neighborhoods have HOA rules about gate style, height, materials, and even color. We work with those requirements regularly and can match specs so your new gate doesn’t trigger a violation letter. Bring us your HOA’s gate guidelines and we’ll build to them.
In most cases, yes. We prefer to repair or replace the operator and keep a structurally sound gate rather than sell you a full new system. If the gate panel itself is rusted through or the posts are compromised, we’ll tell you honestly and price the full replacement.
Call Tampa Gate Company at (866) 976-0095 for a free Hudson estimate. We’ll look at your gate, tell you exactly what it needs, and quote the job before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hudson Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson