Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Clearwater, FL
Gate installation in Clearwater means working with coastal air, aging housing stock, and hardware that corrodes faster than inland Florida. We install, repair, and service gate systems across Clearwater’s barrier island and mainland neighborhoods, and the salt-laden onshore breeze shapes nearly every job we take on. Whether you need a new aluminum driveway gate on Island Estates or a full electric gate replacement for a 1970s condo complex off Fort Harrison Avenue, we quote the work upfront and stand behind the install. Call (866) 976-0095 for a free estimate on any gate project in Clearwater.
Why Clearwater Homes Are Different
Clearwater’s coastal salt-air corridor changes how gates age. In the near-shore ZIPs like 33755 and 33756, and on the beachside blocks around Clearwater Beach and Island Estates, we routinely find hinges, latch components, and operator arms that have seized or rusted through within three to five years. Standard zinc hardware simply doesn’t last here. The housing stock compounds the issue: mid-century block-and-stucco ranch homes built in the 1950s and 60s often still carry original gate hardware, while the 1960s through 1980s condo and townhome complexes along Gulf-to-Bay Boulevard and Keene Road have aging electric operators that predate modern safety-loop requirements. Waterfront estates with pool cages and decorative aluminum or wrought-iron driveway gates add another layer: UV exposure and hurricane-season wind loads stress hinges and operator mounts, and salt-laden humidity works its way into control boards and sensor housings. The result is that Clearwater gate work is as much about replacing salt-eaten components and specifying marine-grade finishes as it is about fixing the gate itself. On beachside and near-shore blocks especially, our technicians look for stainless or marine-grade fasteners that someone swapped in where the original zinc hardware failed.
Styles & brands we work with
Our Main Clearwater Services
Clearwater homeowners and property managers call Tampa Gate Company most often for two things: a gate that won’t open or close properly, and an electric gate system that has stopped responding entirely. Both are covered below with dedicated Clearwater pages.
Gate Repair in Clearwater
Repair work here usually starts with corrosion. Salt air eats hinge pins, latch springs, and weld points on gates that look fine from a distance, and Clearwater’s summer thunderstorm cycles speed up the damage. We rebuild or replace the failed hardware, square the gate back to its posts, and adjust the swing or slide path so it moves cleanly. When we work on older mid-century ranch homes in the 33755 and 33756 ZIPs, the fix is often a combination of new hinges and a fresh coat of marine-grade coating on the frame. See our full breakdown on the Gate Repair in Clearwater page.
Electric Gate Repair in Clearwater
Clearwater’s humidity is hard on control boards and sensors. Electric gate failures here often trace back to corroded terminal connections, a safety loop that has drifted out of spec, or a motor that spent one too many storm seasons exposed to salt mist. We diagnose the entire system, from the keypad and intercom to the operator arm and safety edges, rather than swapping a board and hoping the problem goes away. Condo and townhome complexes built in the 1970s and 80s are a frequent call. Read more on the Electric Gate Repair in Clearwater page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Clearwater
Gate installation in Clearwater has to account for salt, wind, and aging gate openings that were never built for modern electric operators. The mix of 1950s ranch homes with narrow driveway approaches, 1970s condo complexes with rusted pedestrian gates, and waterfront properties with decorative aluminum privacy gates means almost every install is a custom fit. We plan for marine-grade hardware on anything within a mile of the water, and we build operator mounts that survive hurricane-season gusts. For the full scope of what installation involves, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You want controlled access to your driveway without getting out of the car, or your existing manual gate has become a security gap on a property that now needs restricted entry.
What it costs in Clearwater
Automatic gate installation in Clearwater typically runs from $1,200 to over $9,000 for a full single-swing system with operator, including the hardware and control components.
How we do it
We measure the driveway opening and column spacing, match an operator to the gate’s weight and swing arc, run the low-voltage wiring and safety loops, then program remotes, keypads, and obstruction settings.
Driveway Gate Installation
Signs you need it
Your driveway entrance is open to the street, you have no physical barrier for privacy or security, or an old gate is too deteriorated to repair cost-effectively.
What it costs in Clearwater
Driveway gate installation in Clearwater typically ranges from $1,200 to over $9,000 depending on gate type, with a more common swing gate range of $3,000 to $7,000 with a solid finish.
How we do it
We set the gate posts or columns, hang the gate and align the hinges or track, install any requested operator and access controls, and verify the clear opening dimensions work for your vehicles.
Sliding Gate Installation
Signs you need it
Your driveway slope or setback limits swing-gate travel, or your existing slide gate binds on its track and the wheels and rollers are worn beyond repair.
What it costs in Clearwater
Sliding gate installation in Clearwater typically runs from $1,200 to over $9,000, with the final price driven by gate length, track type, and whether automation is included.
How we do it
We lay out the track and end stops, set the roller assemblies and guide posts, then hang the gate, adjust travel limits, and connect the operator if the job calls for automation.
What Gate Installation Costs in Clearwater
These are the line-item ranges we quote from on Clearwater installation work. Every price is agreed and written before any work starts, so you are never surprised at the end of the job.
| Item | Typical range in Clearwater |
|---|---|
| Gate hardware and materials | $600 – $1,800 |
| Single-swing motor setup | $950 – $1,200 |
| Full installation with gate and operator | $1,200 – $9,000+ |
Do you handle the power run and safety edges?
Yes, we run the low-voltage wiring between the operator and the power source, and we install and test safety edges and loops on every automatic gate in Clearwater. Call (866) 976-0095 for a quote specific to your driveway.
What does a full gate installation include?
A full Clearwater installation includes the gate, posts, hinges or track, hardware, operator if requested, access controls, and verification that everything operates and reverses correctly under obstruction. We confirm the price before any work begins.
Brands We Service in Clearwater
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically. Our technicians carry common control boards, safety-loop modules, and remote receivers for these brands, which shortens the repair cycle on Clearwater jobs. For the full brand list, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Clearwater, FL
Clearwater gate work falls into predictable ranges, but salt-air corrosion and the age of the housing stock can push a repair from simple to extensive. Here is what we quote from across the most common Clearwater jobs.
| Service | Typical range in Clearwater |
|---|---|
| Gate hardware and basic swing repair | $200 – $600 |
| Sagging or misaligned gate | $150 – $400 |
| Hinge or weld repair | $150 – $450 |
| Roller or track repair | $200 – $650 |
| Post repair or reset | $250 – $750 |
| Stuck or jammed gate | $100 – $500 |
| Temporary gate removal | $100 – $300 |
| Electric operator or motor repair | $250 – $1,200 |
| Gate installation and replacement | $1,200 – $9,000+ |
What pushes the price up in Clearwater is salt damage that has spread from one component to its neighbors: a rusted hinge often means a weakened post, and a corroded operator arm usually means the mounting plate needs replacement too. We quote the full scope before we start work, and that quoted price is what you pay.
Neighborhoods We Serve in Clearwater
We cover all four Clearwater ZIP codes: 33755, 33756, 33757, and 33758. That includes the beachside and near-shore blocks, the central and northern mainland, and the eastern neighborhoods. Our response time across the Clearwater area is typically same-day or next-day for repair calls, with installation work scheduled in advance.
- Island Estates
- Clearwater Beach
- Glenwood
- Harbor Oaks
- Keene Park
Service Area – Cities Near Clearwater
Tampa Gate Company also serves the surrounding Pinellas communities, so if your property sits just outside Clearwater proper, we can still reach you. We work regularly in Dunedin, FL, South Highpoint, FL, Belleair, FL, and Belleair Bluffs, FL. Call (866) 976-0095 and we will confirm coverage for your street.
Serving Clearwater, FL — Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clearwater
We respond to Clearwater repair calls on a same-day or next-day basis in almost all cases. Salt-air corrosion and storm damage are the two most common emergencies we handle, and we dispatch to Clearwater’s 33755 through 33758 ZIPs as part of our normal service route.
Some Clearwater properties require a permit for a new gate installation, especially when the gate is automated, near a public right-of-way, or part of an HOA-regulated community. We will review your specific site and tell you what the city or your association requires before any work starts.
Yes, we service the barrier island and near-shore neighborhoods regularly. Beachside Clearwater work almost always includes marine-grade hardware recommendations because the salt exposure is severe enough that standard zinc components fail within a few years.
For a free estimate on gate installation or repair in Clearwater, call (866) 976-0095. We quote the work upfront, bring the right parts, and get your gate back to secure, working order.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clearwater Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Rohan Singh