Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Conway, FL
Gate installation in Conway means working with 1950s to 1990s homes on large, often lakefront lots where long driveways meet mature oak canopies and real property-line fencing. Most jobs here are swing or slide gates over fences rather than entry gates on dense new subdivisions. We plan for Conway’s sandy, high-water-table soil and Central Florida’s lightning-heavy summers, because both change how a gate gets anchored and wired. That’s the core of what we do at Tampa Gate Company. For a free estimate on a new gate in Conway, call (866) 976-0095.
Why Conway Homes Are Different
Conway sits between Lake Conway and the airport corridor, south of Orlando International. The housing stock is predominantly single-family homes built between the 1950s and 1990s, many of them lakefront or near-lake, and the lots are wider than what you find in newer Orlando suburbs. That means driveways are longer, gate posts often sit on sandy soil with a high water table, and the gate has to look right on a street of mature oaks and established landscaping, not just function.
The climate is the other factor. Central Florida gets intense summer thunderstorms with frequent lightning, and humidity never really lets up. Exterior keypads, control boards, and even the metalwork itself take a beating. A gate installed here without surge protection on the operator or without a soil plan for the posts will fail early, sometimes within two years. We routinely see operator pads that have settled unevenly because the ground shifted after a wet season, binding the motor or tripping the safety loop. Technicians who work only inland subdivisions don’t expect that. We plan for it on every Conway install.
Styles & brands we work with
Our Main Conway Services
Most homeowners in Conway call us for one of two reasons: a gate that stopped working, or an electric gate system that’s behaving erratically. Both are covered in detail on their own pages.
Gate Repair in Conway
Gate repair in Conway usually comes down to one of three things: a post that has shifted in sandy soil, hardware worn out from humidity and salt air, or an operator that’s struggling after a lightning event. We repair first. If a post can be re-set, a hinge rebuilt, or a roller replaced, that’s the recommendation, not a new gate. For the full breakdown of repair work and what it costs in Conway, see Gate Repair in Conway.
Electric Gate Repair in Conway
Electric gate repair in Conway is a different job from mechanical work. Storms take out control boards, humidity corrodes connections, and shifts in the soil under the gate misalign safety sensors. We diagnose the motor, board, and safety loop as a system, not as separate guesses. If your gate opens halfway, reverses, or ignores the keypad, that’s covered at Electric Gate Repair in Conway.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Conway
Gate installation in Conway is a measured, ordered, and scheduled job, not a same-day dispatch. It starts with a free site visit to measure the opening, check the soil and slope, and spec the right gate for your property. Because Conway lots are older and wider than most new subdivisions, and because the ground here shifts more than inland soil, we anchor posts deeper and level the operator pad with a plan for settling. Our full process and current options are on the Gate Installation page. Expect a written price before any work begins.
Automatic Gate Installation
Signs you need it
You want vehicle access controlled by a keypad, remote, or intercom instead of getting out of the car to open a gate by hand.
What it costs in Conway
Automatic gate installation in Conway typically runs $2,800 to $9,500 depending on gate size, operator type, and access control hardware.
How we do it
We survey the driveway, set posts below the sandy topsoil layer, mount the operator, run power to the pad, and program the keypad or intercom before testing safety loops.
Driveway Gate Installation
Signs you need it
You have a long driveway on a larger Conway lot and want a working barrier that suits the look of the property frontage.
What it costs in Conway
Driveway gate installation in Conway typically runs $2,200 to $7,800 for a single swing or slide gate, excluding the operator if it’s manual.
How we do it
We measure the driveway width and slope, match the gate to your existing fence or planned fence line, set reinforced posts, and hang the gate so it swings or slides cleanly without dragging.
Sliding Gate Installation
Signs you need it
Your driveway slopes toward the house or has limited swing clearance, so a slide gate is the only type that will work without fighting the grade.
What it costs in Conway
Sliding gate installation in Conway typically runs $3,000 to $10,000 including the track, rollers, gate panel, and operator when automated.
How we do it
We pour a level track pad that spans the driveway opening, set the track with drainage in mind for Conway’s wet ground, hang the panel, and align the rollers so the gate moves without binding.
What Gate Installation Costs in Conway
| Item | Typical range in Conway |
|---|---|
| Manual driveway gate (supplied and installed) | $2,200 – $7,800 |
| Automatic gate with operator and keypad | $2,800 – $9,500 |
| Sliding gate with track and automation | $3,000 – $10,000 |
How long does a gate installation take in Conway?
Most residential gate installations in Conway take two to five days from post-setting to final programming. The longest variable is usually operator wire routing and any HOA approval needed before posts can be set. We quote the timeline in writing before work starts.
Do I need HOA approval for a gate in Conway?
Many Conway neighborhoods with formal HOAs require design approval before a new gate or fence line goes in. We can provide drawings and installation details to support your application. Check with your association early so permits and approvals don’t stall the schedule.
Brands We Service in Conway
We work on Mighty Mule, LiftMaster, FAAC, and BFT systems specifically, among others. Because our entire parts inventory is gate-focused, we carry common boards, sensors, and remotes for these brands and can usually diagnose the system without waiting on a parts guess. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Conway, FL
Gate work in Conway is priced by the job, not by the hour, and you always get the number before we start. Here are the typical ranges across the most common services.
| Service | Typical range in Conway |
|---|---|
| Manual driveway gate (supplied and installed) | $2,200 – $7,800 |
| Automatic gate with operator and keypad | $2,800 – $9,500 |
| Sliding gate with track and automation | $3,000 – $10,000 |
| Gate opener troubleshooting and minor board repair | $189 – $545 |
| Operator replacement (supplied and installed) | $850 – $2,600 |
| Metal frame repair and re-welding | $250 – $1,200 |
| Post re-setting, extension, or replacement | $490 – $1,900 |
| Swing gate hardware rebuild (hinges, roller, latch) | $160 – $1,050 |
| Slide gate track alignment or replacement | $220 – $800 |
| New keypad, remote programming, or intercom add-on | $120 – $480 |
| Safety loop or photo-eye replacement | $190 – $610 |
Two things push cost higher in Conway: heavy post anchor work in sandy, high-water-table soil, and the need to run power a long way from the house to the gate on a deep lot. What never changes is this: the price is quoted and agreed before any work starts.
Neighborhoods We Serve in Conway
We cover all of Conway’s 32812 ZIP code, from the lakefront streets near Lake Conway to the subdivisions closer to the airport corridor. Most of the neighborhoods below are a short drive for our techs, which keeps the estimate visit flexible.
- Lake Conway Woods
- Conway Acres
- Dover Shores
- Lake Margaret Terrace
- Mariners Village
Service Area – Cities Near Conway
Beyond Conway, we take gate work throughout the surrounding area. Homeowners in Orlando, FL, Azalea Park, FL, Belle Isle, FL, and Edgewood, FL call us for the same gate-only focus we bring to Conway jobs.
Serving Conway, FL — Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Conway
We cover the full 32812 ZIP code, including lakefront and airport-adjacent properties. If you’re in Conway and have a gate, you’re in our service area. Estimates are free and we schedule them around your availability.
Yes. We work with your HOA’s design requirements, including gate height, material, color, and automation rules. Bring us your association’s guidelines at the estimate and we’ll spec the gate to match. We can also provide drawings for your approval package.
Call (866) 976-0095 and describe what you’re dealing with. We’ll set a time to come out, measure, and give you a written quote. The price you’re quoted is the price you pay, agreed before any work starts.
If your gate is binding, not closing, or you’re ready to replace it with a system that actually fits a Conway lot, call (866) 976-0095. We’ll get you a free estimate from a gate specialist, not a generalist with a side interest in gates.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Conway Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett