Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Four Corners
If your electric gate isn’t opening, is grinding mid-travel, or the keypad quit accepting codes, here’s the direct answer: most electric gate repair in Four Corners involves replacing a failed control board, safety sensor, or loop detector on a 1990s to 2000s builder-grade operator, and it typically runs $180 – $420. We get to Four Corners fast because we know the US-27 and SR-192 corridor well, including the HOA subdivisions and vacation-resort communities where nearly all gated properties sit. Tampa Gate Company is a gate-only repair company, not a general handyman service. Call (866) 976-0095 and you’ll talk to a gate specialist, not a dispatcher reading a script.
Four Corners is a different repair market than Tampa or Orlando proper. The gates here are builder-grade slide and swing operators running keypads, remotes, and loop detectors for short-term-rental traffic. Dozens of guest and cleaning-crew cycles per week wear out rack teeth, keypad membranes, and control boards years ahead of owner-occupied gates in neighboring towns. We know what fails here because we work on these systems every week.
Why Tampa Gate Company Is Four Corners’s Preferred Electric Gate Repair Company
Four Corners property managers and HOA board members call us after a generalist has already guessed wrong once. That’s the pattern. They bring someone in who “also does gates,” the gate works for three days, then the same keypad or safety loop fault comes back. Our Electric Gate Repair team is gate-only. Every technician, every truck, every part shelf is focused on electric and automated gate systems. That singular focus means we recognize a failing DoorKing control board or a Viking operator with worn travel limits in the first few minutes on site.
We’re led by Noel Carver, and our service area includes all of 33897. Noel built Tampa Gate Company around a repair-first approach, meaning we don’t show up with an installation quote already written. If your Four Corners gate needs a $220 safety edge instead of a $3,500 operator swap, that’s exactly what we’ll tell you. The goal is a gate that cycles reliably for short-term-rental traffic, not an upsell.
We’ve worked on gates in communities off US-27 near the SR-192 corridor, in townhome complexes, and at single-family HOA entrances. Those calls have taught us what these specific builder-grade systems look like after ten or fifteen years of Florida exposure. We stock common parts for the brands found most often in Four Corners, so many repairs are one trip, not a diagnosis visit followed by a parts order.
Styles & brands we work with





Gate Access Control in Four Corners
Gate access control is the keypad, intercom, remote receiver, and loop detector stack that decides who gets through your gate and who doesn’t. In Four Corners, the defining feature of access control work is the constant turnover of guest codes at short-term-rental communities. A keypad at an owner-occupied house in Lakeland might handle four or five codes a year. The same keypad on a Four Corners vacation-resort gate gets reprogrammed weekly, and the keypad membrane, the receiver, and the board behind them wear out fast. Call us at (866) 976-0095 and we’ll diagnose the actual failure, whether it’s a dead keypad, a receiver that lost its programming, or a loop detector that stopped seeing cars.
Keypad and Intercom Replacement
A keypad that won’t accept codes or an intercom that crackles and drops calls is usually not one problem, it’s three. The membrane wears, the board behind it corrodes, and the wiring to the receiver gets brittle. We replace the whole assembly when the board is gone, or just the membrane when the board’s still good. In Four Corners, expect $180 – $320 for most keypad replacements on gate systems from DoorKing, Elite, or Linear.
Loop Detector and Safety Edge Repairs
Loop detectors cut into the driveway are what tell a commercial or HOA gate to hold open for a car and close after it passes. In Four Corners, they fail from water intrusion after heavy summer rain and from constant cycling. If your gate closes on a car, that’s a failed loop or a worn safety edge, and it’s a UL 325 violation. We test both, replace the failed part, and set entrapment protection to current code, typically $220 – $400 for a detector and edge on a typical Four Corners slide gate.
Commercial Gate Operator in Four Corners
Commercial gate operator repair in Four Corners means working on the big slide and swing machines that move a 400 to 1,200 pound gate dozens of times a day at HOA entrances and resort access points. These aren’t residential paddle operators. They’re FAAC, BFT, Viking, and DoorKing commercial units with continuous-duty motors, heavy contactors, and safety circuits that need to be set correctly. A commercial operator that’s tripping mid-travel or making a grinding noise is usually a worn gear reduction or a failing contactor, and it will only get worse under back-to-back guest traffic. We diagnose the motor, the board, and the safety loop, not just the obvious symptom.
Operator Retrofit for Aging HOA Gates
Many Four Corners HOA gates still run the original commercial operator installed in the early 2000s. The motors are fine. The control boards aren’t. We can often retrofit a modern UL 325 compliant board, add safety photocells, and extend the life of the existing operator by five to seven years for $600 – $1,100. That’s a third of the price of a full operator swap. When the gear reduction is worn, though, retrofitting makes no sense. We’ll show you the wear and give you a straight answer on which path costs less over ten years.
Trusted Brands We Service in Four Corners
We work on Viking, Ghost Controls, DoorKing, and Elite systems specifically, and we stock boards, remotes, keypads, and loop detectors for those brands and more. Most Four Corners communities run builder-grade operators from one of three or four major manufacturers, and we keep those common parts on our trucks when we service Four Corners. LiftMaster, FAAC, BFT, Linear, and Mighty Mule round out the nine brands our technicians see most. When your gate uses a DoorKing 9150 or an Elite slide operator with years of Florida exposure, we know that machine. Your gate is back to secure, working order without a parts run to Orlando.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Four Corners Homes
- Original 1990s – 2000s control boards giving out: Most Four Corners gated communities were built in a wave from the mid-1990s through the 2000s, and the control boards in those operators are now fifteen to twenty-five years old. Capacitors dry out, relays stick, and the board simply quits. We can often swap in a modern board that meets current UL 325 entrapment standards without replacing the whole operator.
- Keypads and remote receivers failing from constant guest turnover: A Four Corners vacation-resort gate sees new access codes weekly. The keypad membrane wears, the receiver loses programming, and the call box intercom gets pounded by daily use. We replace keypad assemblies and reprogram receivers so the gate holds up to short-term-rental traffic.
- Rust and electrical faults from UV and summer thunderstorms: Central Florida’s humid subtropical climate is hard on outdoor gate hardware. UV breaks down wiring insulation, afternoon lightning storms spike boards, and hurricane-season rain gets into cabinets that were sealed ten years ago. Water intrusion is behind a surprising number of “intermittent” gate failures in Four Corners. We seal and weatherproof control cabinets as part of the repair.
- Slide gates out of alignment with sunken tracks and pads: After heavy hurricane-season rain, the ground under a slide gate track settles and the gate starts binding. The gate’s not broken, but the operator is fighting the track, which burns out motors and strips gears. We true the track, level the pads, and reset travel limits so the operator isn’t working against itself.
Pricing for Electric Gate Repair in Four Corners, FL
Electric gate repair in Four Corners typically costs $180 – $420 for board replacements, keypads, safety edges, and loop detectors on residential systems. Commercial and HOA slide gate operators run higher, generally $600 – $1,100 when we retrofit an existing operator with a new control board and safety photocells, and $2,200 – $4,800 when a full operator replacement is the honest answer. What drives the price: the age of your system, whether you’re on single-family hardware or a commercial operator, and whether safety sensors need to be brought to current UL 325 standards. We quote the full price and get your agreement before any work starts. There’s no invoice surprise when we’re finished. Estimates are free. Call (866) 976-0095 and we’ll walk you through likely costs for your specific gate.
In Four Corners specifically, the retrofit-versus-replace calculation leans retrofit more often than in newer communities, because the 1990s and 2000s operators still have solid cast housings and decent motors. A modern board can often extend one of those machines for years. But when the rack teeth are worn down or the gate’s been hit by a car, we stop retrofitting and show you the replacement numbers. It’s a straight calculation we’ll give you in writing.
One field call we remember clearly: a vacation-resort community off US-27 near the SR-192 corridor where a builder-grade LiftMaster slide gate had stopped responding to guest keypad entry and was tripping mid-travel. The operator’s control board was original to the 2000s install, the rack and pinion had worn teeth, and the loop detector was failing to recognize cleaning-crew vehicles. We swapped the board and detector, reset the travel limits, and trued the track so the gate cycled cleanly for back-to-back guest traffic. That’s a repair-first call, not a replacement call, and it cost the community under $900.
We Also Serve Cities Near Four Corners
We run service calls across Four Corners and into the surrounding communities on the Orange, Osceola, Polk, and Lake county edges. If you manage a gate in Citrus Ridge, Davenport, Horizon West, or Loughman, the same gate-only team covers those areas. If it’s an electric gate with a keypad and a loop detector, it’s our job.
Serving Four Corners, FL — Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Four Corners
Most original 2000s operators on Four Corners HOA gates can be retrofitted with a modern control board and UL 325 photocells for $600 – $1,100 as long as the gear reduction and motor are in serviceable condition. We’ll inspect the rack, pinion, and gearbox and tell you honestly if retrofitting buys you five to seven more years, or if replacement at $2,200 – $4,800 is the cheaper path over ten years. Call (866) 976-0095 for a free inspection and a written recommendation.
Keypads on Four Corners vacation-resort gates fail from heavy use: new guest codes programmed weekly, cleaning crews entering daily, and sun and rain exposure on the membrane. The failure is usually a worn keypad membrane or a corroded board inside the keypad housing, and the repair typically runs $180 – $320. If the same keypad keeps failing after repeated repairs, the root cause is often water intrusion or a receiver losing programming, and we’ll fix the underlying issue rather than just swapping parts. Call (866) 976-0095 and we’ll diagnose it over the phone first.
On Four Corners HOA gates, a sagging gate is usually a combination of worn hinges, a post that’s shifted in sandy soil after heavy rain, and a welded frame that’s fatigued. We’ll inspect the post footings, the hinge barrels, and the frame welds and tell you which one is actually failing. Posts get set in concrete, hinges get replaced, and frames get re-welded, with most sagging-gate repairs running $300 – $800 on a typical Four Corners swing gate.
Yes. Any electric gate in Four Corners, whether it’s a 1990s original or a recent install, must have working UL 325 entrapment protection: a reverse-on-contact safety edge, non-contact photocells, and a properly functioning loop detector. HOA insurance reviews and code enforcement checks in this area are flagging older gates that lack photocells entirely. We bring older systems up to current UL 325 standards, usually $150 – $350 per gate for safety edges and photocell sets installed and tested.
Yes, most shifted slide gate tracks in Four Corners can be re-leveled and re-anchored without replacing the operator. Heavy hurricane-season rain saturates the soil under the concrete pad, the pad settles, and the gate binds. We lift and re-shim the track, true the wheels, and reset the travel limits. When the track has shifted far enough to strip the rack or the pinion, repair cost climbs to $400 – $800, but the operator usually survives. Call (866) 976-0095 and we’ll assess whether the operator is still serviceable before any work begins.
Written by Noel Carver, Owner at Tampa Gate Company, serving Four Corners since 2014.