Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Four Corners, FL
Gate installation in Four Corners is usually a replacement job for a 1990s or 2000s builder-grade operator that’s finally given out, not a custom fabrication project. Most communities here run sliding aluminum gates with keypad and remote access, and the Florida sun plus daily short-term-rental traffic wears them down faster than anyone expects. We’re a gate-only shop, so when a HOA or vacation-community manager in the 33897 ZIP calls us at (866) 976-0095, they’re talking to a technician who knows exactly which motor, board, and track their system uses.
Why Four Corners Homes Are Different
Four Corners sits where Lake, Orange, Osceola, and Polk counties meet, and the housing stock tells the story: gated HOA subdivisions and townhome communities built mostly between the early 1990s and the early 2010s, strung along the US-27 and SR-192 corridors. These aren’t custom estate gates. They’re production-built sliding and swing operators that came with the development, and two decades of Central Florida weather has pushed many of them past their design life. Intense UV breaks down control-board housings and remote casings. Summer thunderstorms bring lightning strikes that fry circuit boards. Hurricane-season wind gusts shove gates off their tracks and twist aluminum frames. The recurring job in Four Corners is restoring reliable operation to aging automated access systems, especially in communities where a gate cycles dozens of times a day for guests, delivery vehicles, and cleaning crews.
Styles & brands we work with
Our Main Four Corners Services
Most calls we get from Four Corners fall into two categories: a gate that won’t open or close reliably, and an electric operator or access system that’s misbehaving. Here’s what each involves around here.
Gate Repair in Four Corners
A gate off its track is a security problem the moment it happens, and in Four Corners it’s often a sliding gate that hurricane winds pushed out of alignment or a hinge that rusted through after years of afternoon storms. We repair first. A bent wheel, a sagging hinge, a cracked weld: most failures are fixable without replacing the whole gate, and that’s the honest recommendation we give. If you’re dealing with a gate that drags, binds, or won’t stay closed, see Gate Repair in Four Corners for specifics on the repair side.
Electric Gate Repair in Four Corners
When the operator runs but the gate doesn’t move, or the keypad works but the remote doesn’t, the problem is usually in the board, the safety loop, or the wiring between them. Short-term-rental communities off SR-192 see keypad and intercom failures far sooner than owner-occupied gates, because guests punch codes constantly and property managers reprogram access on a weekly basis. We diagnose the motor, board, sensors, and loops, not just the obvious symptom. Details are on our Electric Gate Repair in Four Corners page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Four Corners
When a gate is beyond repair, or a community needs a new access point installed from scratch, gate installation in Four Corners means choosing hardware that survives intense UV, daily summer storms, and constant guest and service-vehicle cycles. We measure, spec, and install sliding and swing gate systems that hold up to short-term-rental traffic, with operators, loops, and access control sized for actual use, not optimistic guesses. See our full Gate Installation service for complete details, or keep reading for what we cover in Four Corners specifically.
Automatic Gate Installation
Signs you need it
Your gate works manually but you want keypad, remote, or intercom access, or the existing operator is dead and replacement parts are no longer available for a 20-year-old board.
What it costs in Four Corners
Automatic gate installation in Four Corners typically runs $2,800 to $9,500 depending on whether it’s an operator retrofit on an existing gate or a full new automated system.
How we do it
We assess the gate’s condition, specify an operator rated for its weight and daily cycle count, install the motor and arm or slide rack, run power, mount the keypad or intercom, set safety loops, and program remotes before handing over tested access.
Driveway Gate Installation
Signs you need it
You’re adding a gate where none exists, usually at a community entrance or a private driveway off a busy Four Corners connector road.
What it costs in Four Corners
A new driveway gate in Four Corners generally falls between $3,500 and $12,000 for the gate, posts, hardware, and basic setup, before operators or access systems are added.
How we do it
We check setback and swing room, pour or set posts into concrete pads rated for the gate’s weight, hang the gate level, install hinges and wheels, then add automation and access components if the job calls for them.
Sliding Gate Installation
Signs you need it
Your property has limited swing clearance, a steep driveway approach, or you’re replacing an old sliding gate whose track and rollers have worn out together.
What it costs in Four Corners
Sliding gate installation in Four Corners typically runs $3,000 to $10,000, with cantilever designs at the higher end because they don’t need a ground track that storms and debris can clog.
How we do it
We measure the opening and lateral clearance, set the track or cantilever posts, mount the gate and carrier rollers, align it to open smoothly, and then connect the operator and safety sensors.
What Gate Installation Costs in Four Corners
| Item | Typical range in Four Corners |
|---|---|
| Operator retrofit on existing gate | $2,800 – $5,500 |
| Full automatic driveway gate system | $4,500 – $12,000 |
| Sliding gate with new track and posts | $3,000 – $10,000 |
How long does gate installation take in Four Corners?
Most Four Corners gate installations finish in one to two days once materials arrive. Custom gate orders can add a week or two for fabrication. HOA review can extend scheduling in gated communities, so we coordinate the approval first.
Do you handle permits for Four Corners gate installation?
We coordinate with HOA boards and the county permitting office where required. Four Corners straddles four counties, so requirements vary by which side of the intersection your property sits on. We handle the paperwork and let you know what’s needed before work starts.
Brands We Service in Four Corners
We work on Viking and Ghost Controls systems specifically, and we stock the DoorKing and Elite parts Four Corners communities call about most: boards, remotes, loop detectors, and keypads. Because we’re a gate-only shop, we carry spares for these brands that generalists have to special-order, which keeps most Four Corners repairs to a single visit. See our brands for the full list of nine systems we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Four Corners, FL
| Service | Typical range in Four Corners |
|---|---|
| Operator retrofit on existing gate | $2,800 – $5,500 |
| Full automatic driveway gate system | $4,500 – $12,000 |
| Sliding gate with new track and posts | $3,000 – $10,000 |
| Gate opener motor replacement | $850 – $2,800 |
| Control board replacement | $650 – $1,800 |
| Safety sensor or loop replacement | $450 – $1,500 |
| Hinge, wheel, or track repair | $350 – $1,800 |
| Structural gate repair | $550 – $2,800 |
| Keypad, intercom, or remote system install | $500 – $3,500 |
Two things push pricing up in Four Corners most often: rust and storm damage from the humid, hurricane-prone climate, and the complexity of access systems at short-term-rental communities that need multiple remotes, keypads, and intercom programming. We quote everything upfront, in writing, and the price you approve is the price you pay, before any work begins.
Neighborhoods We Serve in Four Corners
We work across the 33897 ZIP and the communities that line US-27 and SR-192, from the gated subdivisions off Bella Citta Boulevard to the townhome and resort communities near ChampionsGate and Reunion. Our typical response time for a Four Corners call is the same day or next morning, depending on what the gate is doing.
- ChampionsGate
- Reunion
- West Haven
- The Shire at West Haven
- Solana
Service Area – Cities Near Four Corners
Our gate work in Four Corners also takes us into the surrounding communities along the US-27 and I-4 corridors. We regularly handle gate repair for HOAs and short-term-rental communities in Citrus Ridge, FL, Davenport, FL, Horizon West, FL, and Loughman, FL. If your gate isn’t working, call us and we’ll let you know if we can get a truck to you.
Serving Four Corners, FL — Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Four Corners
We dispatch to Four Corners the same day for most gate failures, especially when a gate is stuck open and the property can’t be secured. Florida storms can slow traffic, but we route the nearest available technician to your community. Call (866) 976-0095 and tell us what the gate is doing.
Yes, HOA and vacation-resort community gate systems are the bulk of our Four Corners work. We coordinate access, handle repair logs, and quote before any work starts so boards can approve without surprises. We’re used to the community gate rhythm: guest codes, vendor entry, and daily cycles.
We schedule around turnover windows whenever we can. Property managers in Four Corners usually need the gate working before the next check-in, so we prioritize rentals where the gate is the security layer between the street and the unit. Call us and tell us your check-in schedule.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Four Corners Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Robert Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Adam Lawson"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Travis Bennett