Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Saint George
A gate that won’t open, won’t close, or won’t latch properly is a security problem first and a convenience problem second. We’re Tampa Gate Company, a gate-only specialist serving Saint George (ZIP 33761) with repairs on electric and manual gates, automatic operators, hinges, posts, and locks. Most Saint George calls get a same-day or next-day visit from a technician who works on gates exclusively. Call (866) 976-0095 for a free estimate, quoted and agreed before any work starts.
Why Tampa Gate Company Is Saint George’s Preferred Gate Repair Company
We’re not a general handyman service that happens to touch gates. We’re a gate company. Every technician we send to Saint George diagnoses gate systems all day, every day, with experience across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When a Saint George homeowner calls us about a sagging hinge post off Curlew Road or a Viking operator that hums but won’t move, we know the system before we arrive. That means fewer return trips and repairs that hold up in this climate.
Saint George sits a few miles inland from Clearwater, which means the Gulf’s salt air reaches pretty much every hinge, latch, and operator housing in the neighborhood. We’ve worked on enough 1970s and 1980s villa and ranch gates here to know exactly what that air does to powder coating, welds, and control boards. We stock the parts those older systems need, and when a part is obsolete, we’ll tell you straight and offer a retrofit rather than pretending a band-aid fix will last. Our Gate Repair team is built for this kind of work.
Styles & brands we work with
Commercial Gate Repair in Saint George
Commercial Gate Repair in Saint George covers a different set of problems than residential work: slide gates at villa community entrances, swing gates at small office parks, and access-control gates at self-storage and warehouse properties along the commercial corridors off Curlew Road and McMullen Booth Road. These gates cycle dozens or hundreds of times a day, so failures tend to show up as worn rollers, burned-out operator motors, and control boards that drop programming or fail to recognize remotes. A typical commercial gate repair in Saint George runs $350 to $1,200 depending on the operator brand and the extent of the mechanical damage. Board replacements on older DoorKing or Viking commercial operators usually land between $500 and $900.
Operator Diagnostics and Control Board Work
Commercial gate operators in Saint George often run on hardware that’s 10 to 15 years old. When a board fails, the first question is whether it’s worth replacing the board alone or retrofitting the operator with entrapment protection. We diagnose first, then give you a straight answer with numbers. Most Saint George property managers prefer a retrofit that brings the gate up to current safety standards rather than buying another obsolete board that will fail again in two years.
Slide Gate Track and Roller Repair
Slide gates are common at Saint George townhome and villa communities. The local failure mode is almost always the same: salt air corrodes the steel track and roller bearings, the gate starts to drag, and the motor burns itself out trying to move the added resistance. We realign tracks, replace seized rollers with corrosion-resistant hardware, and set the operator limits so the gate isn’t fighting itself. Expect $300 to $700 for track and roller work before any motor or board replacement.
Iron Gate Repair in Saint George
Iron Gate Repair in Saint George deals with what the Gulf air does to steel and wrought-iron gates: rust at weld points, flaking powder coat, seized hinges, and posts that lean because their footings have been working loose for twenty years in sandy Pinellas soil. A typical iron gate repair in Saint George costs $250 to $900. Simple hinge replacement and realignment sits at the low end. Cutting out rusted sections, welding in new steel, and refinishing sits higher. If a post footing has failed, expect to add $400 to $1,200 for digging, re-setting, and re-anchoring.
Hinge and Post Reset Work
When an iron gate sags, the hinge is rarely the only cause. In Saint George’s sandy soil, gate posts slowly lean under the gate’s weight, and hurricane-season wind makes it worse. We reset posts in concrete with proper depth and drainage, then re-hang the gate so it swings clean and latches square. Skip the post work and you’ll be tightening hinges every six months until the weld fails.
Weld and Rust Remediation
Salt air finds every scratch in the finish and starts rusting from the inside out. We grind out rust, weld any cracked or separated joints, and apply a corrosion-resistant prime and finish suited to coastal Pinellas conditions. Corroded iron gates in Saint George are usually repairable; it’s only when the steel itself has thinned to the point of structural failure that replacement becomes the honest recommendation.
Trusted Brands We Service in Saint George
We work on Viking, DoorKing, and Elite systems specifically, among others. Our techs can spot a DoorKing 9150 board or a Viking G-5 operator by sight, which means we arrive with the right diagnostic approach and usually the right parts on the truck. For Saint George customers with older systems, we keep common replacement boards, safety photocells, receivers, and remotes in local inventory or available from our Tampa parts bench on next-day order. Fast turnaround matters when your community gate won’t let residents in.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Saint George Homes
- Pool safety gates that no longer self-close or self-latch. Florida pool-barrier code requires it. Salt air seizes the spring hinges and the latch, the gate stops closing, and you’re out of compliance. We replace with corrosion-resistant hardware and test the closing speed and latching before we leave.
- Legacy operators without working entrapment protection. Most Saint George gates date to the 1970s through 1990s. We routinely open control boxes and find vintage LiftMaster or DoorKing boards with disconnected or missing photocells and edge sensors. Some can be retrofitted. Some should be replaced. We’ll show you the options and the cost difference.
- Sagging gates from failed post footings. The gate drags on the driveway, the hinges bend, and eventually the operator burns out from working against the sag. The real fix is resetting the post, not cranking the hinges tighter.
- Corroded operator housings and seized hinges. The same salt air that rusts patio furniture attacks gate hardware. Housing seals crack, moisture gets in, and the motor or board shorts. We’ll repair what’s serviceable and be straight with you when it isn’t.
Pricing for Gate Repair in Saint George, FL
Gate repair in Saint George typically ranges from $180 to $1,400. Here’s what that looks like in real terms. A hinge and latch replacement on a pool safety gate runs $180 to $350. A control board replacement on a residential operator runs $350 to $700. A full operator replacement with safety photocells runs $800 to $1,400 installed. Post resets add $400 to $1,200 depending on footing condition. The final price is quoted and agreed before any work starts, so you know the number before we open the tool bag. Call (866) 976-0095 for a free estimate. Estimates don’t obligate anything.
We Also Serve Cities Near Saint George
We provide Gate Repair in Saint George plus the surrounding Pinellas communities. If you’re in Greenbriar, Safety Harbor, Oldsmar, or Palm Harbor, the same gate-only technicians cover your area. Call for availability.
Serving Saint George, FL — Our Local Coverage Area
We’re based in the Saint George area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Saint George
Yes. A pool gate that won’t self-close or self-latch is almost always repairable. In this area, the cause is typically salt-corroded spring hinges or a seized latch. We replace the hardware, adjust the closing tension, and test the gate to confirm it closes and latches on its own. Cost runs $180 to $350. Call (866) 976-0095 to schedule, and we’ll quote it before we start.
It comes down to whether the board failed in isolation or the whole operator has aged out. If the motor, gearbox, and limit switches are still sound, a board swap for $350 to $700 is the right call. If the operator predates UL 325 entrapment protection and the board is fried, you’re often better off replacing the operator entirely for $800 to $1,400 with current safety features rather than buying another obsolete board. We’ll show you the numbers for both.
Because the hinge post footing has likely settled or shifted in the sandy soil, and tightening hinges just bends the hinge leaves. The gate’s weight is pulling the post out of square. The durable fix is resetting the post in concrete, then re-hanging the gate. On Saint George lots we’ve also seen hurricane-season wind accelerate the process if the footing was shallow to begin with. We’ll assess the post before touching the hinges.
Saint George is unincorporated Pinellas County, so gate work falls under county permitting rather than a standalone city office. Most repairs like hinge replacement, operator swaps, and board changes don’t require a permit. Post resets and major structural changes can, especially for pool-barrier compliance. We’ll tell you what applies to your specific job before we quote it.
Most corroded iron gates in Saint George are repairable. Rust at weld points and flaking finish can be ground out, welded, and refinished, usually for $250 to $900. Replacement is only the right call when the steel has thinned to where sections are structurally weak or the gate has sagged beyond what post and hinge work can correct. We’ll give you a straight answer with prices for both paths.
If your gate is giving you trouble, call (866) 976-0095 for a free estimate. We’ll diagnose it, quote it, and fix it right the first time.
Written by Noel Carver, Owner at Tampa Gate Company, serving Saint George since 2009.