Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pebble Creek, FL
Gate installation in Pebble Creek usually means matching a stucco-pillared driveway or courtyard gate to the rest of the home’s Mediterranean styling, then spec’ing hardware that survives the New Tampa humidity and afternoon storms. Most homes here were built in the 1990s and 2000s as planned-community product, so gates lean decorative and HOA-reviewed rather than utilitarian. Tampa Gate Company has served Pebble Creek since 2013, and we handle the full scope: new gate fabrication, operator installation, electric wiring, and repair. Call (866) 976-0095 for a free estimate on your Pebble Creek project.
Why Pebble Creek Homes Are Different
Pebble Creek sits in the New Tampa corridor inside ZIP 33647, and it’s a master-planned, deed-restricted community. That changes gate work in a way you don’t see in unincorporated Hillsborough County or the older Tampa neighborhoods. Most repairs and installations here are on HOA-governed decorative gates and access gates, not open rural ranch fencing. The architectural review board has to sign off on styles and finishes, so a gate that looks fine to a homeowner can still trigger a compliance notice if it doesn’t match the community’s approved specs.
The housing stock runs heavily toward 1990s and 2000s stucco single-family homes and townhomes with Spanish and Mediterranean detailing. Gates are typically stucco-pillared drive and courtyard gates with matching metal inserts, plus gated-community entrance gates and pool or amenity gates. You don’t see many freestanding rural fences here.
Subtropical central Florida weather accelerates the problems. Intense sun fades powder coat on aluminum and warps wood. High humidity and heavy summer thunderstorms push rust into steel inserts and stress swing hardware. When a tropical system blows through, the rain and wind load can knock a marginal operator or hinge set past its limit. We keep Pebble Creek’s approved color and style specs on hand so repairs and replacements blend with the community standard instead of standing out.
Styles & brands we work with
Our Main Pebble Creek Services
Pebble Creek homeowners call us about two things most often: a gate that won’t move correctly and an electric operator that has stopped responding. Here’s what each one involves locally.
Gate Repair in Pebble Creek
Gate repair in Pebble Creek typically means a swing gate dragging on its hinges, a sagging panel on a stucco-pillared courtyard entry, or a latch that no longer lines up. We see rusted steel inserts on older 1990s installations, worn wheel bearings on sliding gates, and hinge posts that have shifted in the sandy New Tampa soil. Because Pebble Creek is deed-restricted, we quote the repair around matching the existing gate’s finish and style so the HOA review goes through cleanly. Read more on our Gate Repair in Pebble Creek page.
Electric Gate Repair in Pebble Creek
Electric gate repair in Pebble Creek usually points to a failed control board, a safety loop that stopped reading, or a motor that works but has lost its limit settings. The humidity here corrodes board connections faster than drier climates, and afternoon lightning can take out a board even when the motor is still fine. We diagnose the whole circuit, from keypad to safety edge, rather than swapping parts at random. If your automatic gate is acting up, call us. Or see Electric Gate Repair in Pebble Creek for details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pebble Creek
New gate installation in Pebble Creek starts with the HOA question: what styles, colors, and heights have the architectural review board already approved for your section of the community? From there, we size the gate to the existing pillars or opening, select hardware rated for the humidity and storm exposure, and install it to swing or slide correctly from day one. For a wider look at the service, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re opening and closing a heavy driveway gate by hand every time, or you want visitor access control without leaving the house.
What it costs in Pebble Creek
In Pebble Creek, automatic gate installations generally fall between $2,800 and $7,000 depending on whether we’re adding an operator to an existing gate or building the full gate and motor system.
How we do it
We mount the operator, set the travel limits, install the safety photoelectric sensors, and test the full open-close cycle including the auto-reverse function.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags, no longer closes fully, or was never built to match the rest of the home’s stucco and metal styling.
What it costs in Pebble Creek
A new driveway gate in Pebble Creek runs roughly $1,700 to $5,500 for the gate panel and hardware, with the higher end reflecting custom metal inserts and finish work.
How we do it
We measure the existing opening or pillars, build or order the gate to the approved spec, hang it on new hinges or a track, and adjust until it moves cleanly and latches securely.
Electric Gate Installation
Signs you need it
You have a new gate going in or an existing manual gate you want motorized, and the run needs a keypad, intercom, or vehicle sensor.
What it costs in Pebble Creek
Electric gate installation in Pebble Creek generally runs $2,500 to $6,300, covering the operator, wiring, control board, and safety loop installation.
How we do it
We run the power and low-voltage wiring, mount the operator and control board, install the loop detector or keypad, and tune the open and close limits.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your opening is too tight for a swing gate, and you want a gate that slides on a track instead of arcing into the driveway.
What it costs in Pebble Creek
Sliding gate installation in Pebble Creek runs from about $2,800 to $6,900, with cantilever and track systems priced differently.
How we do it
We set the track or concrete pad, hang the gate panel, install the roller assembly and stop, and then add an operator if the gate is electric.
What Gate Installation Costs in Pebble Creek
| Item | Typical range in Pebble Creek |
|---|---|
| Driveway gate panel and hardware | $1,700 – $5,500 |
| Automatic gate system | $2,800 – $7,000 |
| Electric gate installation | $2,500 – $6,300 |
Will the HOA make me change the gate design?
In Pebble Creek, yes, the architectural review board can require a design change if your gate style or color falls outside the approved specs, so we check the community’s standards before building or ordering anything.
Can you match my existing gate’s finish on a new installation?
We match the approved Pebble Creek color and finish specs on hand for the community, and for custom work we order the same powder coat or metal finish so the new gate blends with the rest of the home. Call (866) 976-0095 for a free measure and quote.
Brands We Service in Pebble Creek
We service LiftMaster, FAAC, BFT, and Mighty Mule systems specifically, which covers most of the electric operators in Pebble Creek’s gated sections and private driveways. Our techs carry common control boards and remotes for these brands so a simple operator failure doesn’t mean waiting days for a part. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pebble Creek, FL
| Service | Typical range in Pebble Creek |
|---|---|
| Gate repair | $175 – $600+ |
| Electric gate repair | $225 – $800+ |
| Driveway gate panel and hardware | $1,700 – $5,500 |
| Automatic gate system | $2,800 – $7,000 |
| Electric gate installation | $2,500 – $6,300 |
| Sliding gate installation | $2,800 – $6,900 |
Prices in Pebble Creek push higher when the gate is a custom size, when the finish has to match a specific community spec, or when an old 1990s installation needs post and hinge work before new hardware goes on. Every job is quoted and agreed in writing before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Pebble Creek
Pebble Creek’s street network and gated sections are small enough that we can typically schedule within a few business days for non-emergency calls, with emergency repair availability for security failures. We regularly work through the following neighborhoods:
- Pebble Creek Village
- The Enclave at Pebble Creek
- Pebble Creek Country Club area
- Cross Creek
Service Area – Cities Near Pebble Creek
Our gate work in Pebble Creek extends to surrounding New Tampa and northeast Hillsborough communities. We serve Thonotosassa, FL for larger lots and rural-style gates, University, FL for USF-area rental and HOA properties, Temple Terrace, FL for mid-century and newer subdivision gates, and Lutz, FL for acreage and gated-community entrance systems.
Serving Pebble Creek, FL — Our Local Coverage Area
We’re based in the Pebble Creek area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pebble Creek
For non-emergency repair or installation, we typically schedule within a few business days across the 33647 ZIP. Emergency calls for a gate that won’t secure or an operator that’s stuck open get priority, and we’ll tell you the earliest realistic window when you call.
For a straight repair that keeps the same gate panel and finish, approval usually isn’t required. If a panel, color, or style has to change, the architectural review board may need to sign off, and we quote the work with that process in mind so you’re not surprised.
Yes. Because we’re a gate specialist, the same tech can diagnose the mechanical side and the electric controls, including the board, keypad, and safety loops, so you don’t have to coordinate two contractors for one gate. Call (866) 976-0095 for a free estimate.
For gate repair, electric gate work, or new installation in Pebble Creek, call Tampa Gate Company at (866) 976-0095. We quote every job before work begins, and we know this community’s HOA specs well enough to keep your gate compliant the first time.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pebble Creek Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Scott Miller"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Rachel Meyer"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Guzman